White Travertine Table Tops
STOOANCE White Travertine Table Tops are made for indoor tables in kitchens, bathrooms, and other interior spaces. The product is listed in white travertine with a polished finish and straight or bullnose edges. Review the actual material for natural pores, veining, fissures, and color variation.
Tops are fabricated to project dimensions. Listed thicknesses are 18, 20, and 30 mm; other thicknesses require confirmation. STOOANCE can support remote material selection and review the approved batch, drawings, finish, and edge details before production.
- Project customized dimensions
- Polished finish; straight or bullnose edges
- 18, 20, and 30 mm listed thicknesses
- Remote material selection and batch approval support
- Inspection photos, numbering, and packing records available according to the order
White Travertine Appearance and Natural Variation
White travertine offers a light, natural stone appearance for table tops. Its surface may show changes in tone, linear markings, open pores, and small natural fissures. These features vary from piece to piece, so a product image or small sample cannot define the appearance of every finished top.
For a group of tables, review the actual material and agree on an acceptable color range before fabrication. Slab or batch selection also matters when several tops will be seen together: a coordinated set may call for attention to marking direction and the placement of more distinctive areas. Exact visual matching should be assessed against the available stone.
STOOANCE can support remote slab selection with photos or video and record the approved batch for the order. Ask to review visible pores, fissures, and any proposed resin treatment on the selected material. Final appearance should be approved from that evidence before production begins.
Request a Quote
Sizes, Thicknesses, Finish and Edges
STOOANCE offers White Travertine Table Tops in project customized sizes. Share the required length, width, shape, and quantity so the team can check the selected material and confirm what can be produced from the available batch. Final dimensions depend on the approved stone and order requirements.
Source-listed thickness options are 18 mm, 20 mm, and 30 mm; other customized thicknesses can be discussed. The appropriate choice depends on the tabletop dimensions, base or support design, intended use, and fabrication details. Confirm the finished thickness for each piece before production.
The listed finish is polished, with straight and bullnose edge options. A straight edge gives a clean profile, while a bullnose creates a rounded edge. Specify the edge on each exposed side, including any different treatment for concealed sides or adjoining pieces. Finish and edge details should be approved against the selected material before the order is finalized.
Request a Quote
Indoor Applications and Design Coordination
White Travertine Table Tops can be considered for indoor dining areas, kitchen furniture and bathroom settings. Their light color can pair with wood, metal or other stone, while the visible pores and natural markings give each top a distinct appearance. Review the actual material in the room’s lighting before settling on the surrounding finishes.
For spaces with multiple tables, coordinate the approved batch and the orientation of visible stone patterns so the tops read as a group. A small sample may not show the full range of color, pores and fissures across larger pieces. Remote slab selection and photo or video records can help designers and buyers review that range before production.
The intended use also matters. In kitchens or other areas where spills are likely, discuss surface care, any treatment and routine maintenance with the project team before specifying travertine. Coordinate the table base and installation method with the local furniture maker or installer; overseas installation is normally handled by qualified local contractors.
Request a Quote
Drawing Review and Custom Fabrication
STOOANCE fabricates White Travertine Table Tops to approved project drawings. Before production, the team reviews the selected material or batch alongside the intended use and fabrication details. Natural pores, fissures, color movement, and any resin treatment should be assessed on the actual stone so the approved appearance is clear.
For an accurate drawing review and quotation, send:
- A dimensioned drawing showing the top’s overall shape, size, and quantity.
- The required thickness, edge profile, and locations of any cutouts or openings.
- The finish and any visible-face or vein-direction requirements.
- The destination, packing requirements, and project schedule.
STOOANCE confirms the fabrication details against the selected material before cutting. Inspection can cover dimensions, thickness, flatness, finish, edges, quantities, and piece numbering, with photos or video, labels, and packing records arranged according to the order. Availability, achievable details, tolerances, and production timing require confirmation for the approved batch and drawings.
Request a QuoteTechnical Specifications
Product Information
- Product
- White Travertine Table Tops
- Material / Category
- Travertine
- Size
- Project Customized Size
- Thickness
- 18mm, 20mm, 30mm, Other Customized Thickness
- Finish
- Polished
- Location
- Bathroom, Indoor, Kitchen
- Countertops Type
- Table Tops
- Edge Type
- Bullnose, Straight
- Color
- White
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
White Travertine Table Tops FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteWhat sizes can White Travertine Table Tops be made in?
White Travertine Table Tops are made to project-customized sizes; the product listing does not specify fixed length or width options. Listed thicknesses are 18 mm, 20 mm, and 30 mm, with other thicknesses available for review. STOOANCE confirms dimensions, thickness, polished finish, and straight or bullnose edges from your drawings before fabrication. Send the required length, width, thickness, quantity, and edge details so STOOANCE can check the selected material and batch and confirm what can be made.
Are 18 mm, 20 mm and 30 mm thicknesses available for my selected material and dimensions?
Yes—18 mm, 20 mm, and 30 mm are listed thickness options for STOOANCE White Travertine Table Tops. Availability for your selected material, batch, and dimensions is subject to confirmation. STOOANCE reviews the chosen stone and fabrication drawings before production, so the feasible thickness may depend on the table top size, edge detail, and cutouts. Send your dimensions, preferred thickness, drawings, quantity, and destination so STOOANCE can check the current material and confirm an option for your order.
Can I choose a straight or bullnose edge?
Yes. Straight and bullnose edges are both listed options for STOOANCE White Travertine Table Tops. The final edge profile should be confirmed against your drawings, table dimensions, selected thickness, and intended use before fabrication. Because travertine varies naturally, approve the actual material or batch as well. Send your drawings, preferred edge, thickness, quantity, and destination so STOOANCE can review the details and prepare a quotation.
Is a polished white travertine table top suitable for my kitchen or bathroom application?
Yes, a polished white travertine table top can be considered for an indoor kitchen or bathroom; both applications and the polished finish are listed for this product. Suitability depends on how the surface will be used and maintained. Review the actual batch for natural colour variation, pores and fissures, and confirm any filling or sealing requirements for your application. Send STOOANCE your drawings, dimensions, intended use and edge preference so it can confirm the material, fabrication details and care requirements before production.
How much can color, veining and pores vary between pieces?
Color, veining, and visible pores can vary from piece to piece because white travertine is natural stone. The range cannot be quantified without reviewing the actual batch. STOOANCE can provide photos or video for remote selection and check the color range and natural features against the approved material before shipment. For a coordinated set of table tops, review the proposed pieces together, agree on an acceptable range, and approve the batch before fabrication.
Can STOOANCE arrange remote material selection for White Travertine Table Tops?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
White Travertine Table Tops: A Buyer’s Guide to Specification and Sourcing
Use this guide to decide where travertine works, specify the right finish and fabrication details, compare suppliers against clear quality criteria, and avoid costly mistakes in sample approval, inspection, pricing, and international delivery.
What Are White Travertine Table Tops?
Travertine is a natural calcium carbonate stone formed by mineral deposits, with pores that may be visible or filled during processing. White Travertine Table Tops can also show cream or gray tones, directional veining, and natural fissures; these features vary from slab to slab.
White is a commercial color description, not a promise of a uniform surface. Buyers should approve the actual material or batch and agree on the acceptable color range and pore treatment before fabrication.
A fabricated stone top is the cut and finished surface, not necessarily a complete table with a base. Before ordering, confirm whether a base is included, then specify dimensions, thickness, polished finish, straight or bullnose edge, cutouts, and the intended support arrangement.
Where Do White Travertine Table Tops Work Best?
White Travertine Table Tops suit interiors where spill response and routine care are planned. Match each setting to its exposure to food, cosmetics, cleaning products, and heavy use.
Dining and Hospitality
Indoor dining tables can work where staff or occupants wipe spills promptly. Wine, citrus, and vinegar can etch the stone; oils and colored liquids may stain.
Hospitality tables need a cleaning protocol that avoids acidic products and abrasive scrubbing. Confirm the proposed sealing and maintenance plan with the stone professional.
Bathrooms and Kitchens
Bathroom tops face cosmetics, soap residue, and frequent water exposure. Check how the selected material and finish will be sealed and cleaned.
Kitchen tables face food acids and grease more often. Specify them only when users accept prompt cleanup and periodic care.
Outdoor and Heavy Use
Outdoor exposure and demanding commercial traffic call for a project-specific review of the actual travertine, finish, installation conditions, and maintenance regime.
A polished interior sample alone cannot establish suitability for those settings.
Types of White Travertine Table Tops
White Travertine Table Tops can be cut to several practical formats. Confirm each layout against the selected slab, supporting base, handling route, and installation access before fabrication.
Round Tops
Round cuts make the perimeter highly visible. Review pore distribution across the slab and confirm centered base support.
Rectangular Tops
Rectangular cuts can follow or cross the stone’s visual direction. Check corner protection and the full support span.
Oval Tops
Oval profiles expose long curved edges. Approve the cutting layout and verify that the top can pass through access points.
Small Occasional Tops
Small tops may use suitable slab offcuts, subject to batch approval. Check edge appearance and base attachment.
Large Dining or Conference Tops
Large spans require slab and seam planning. Confirm base support, lifting equipment, and doorway or elevator clearance.
Drawing-Based Custom Tops
Custom outlines require approved templates or shop drawings. Specify vein direction, exposed edges, support points, and installation sequence.
Compare Stone Selection, Cut, and Finish
White Travertine Table Tops vary by batch and cut. Review full slab images alongside a physical sample; a small sample may miss changes in color, pores, or fill.
| Option | Appearance | Maintenance consideration | Approval check |
|---|---|---|---|
| Vein-cut | Linear bands | Fill may follow pores | Confirm vein direction |
| Cross-cut | Cloudier pattern | Inspect exposed pores | Confirm cut availability |
| Polished | Reflective surface | Etching shows readily | Check gloss and fill |
| Honed | Matte surface | Still vulnerable to staining | Confirm suitability and sample |
Inspect the Actual Batch
Compare slabs under consistent lighting. Check color range, pore distribution, vein direction, natural fissures, and whether resin or fill remains visible.
Choose the Cut
Vein-cut travertine emphasizes linear bands; cross-cut shows a cloudier pattern where available. Approve the intended orientation on the actual slabs.
Confirm the Finish
Polished is the source-listed product finish. Request honed or another finish only after STOOANCE confirms suitability for the selected material.
Specify Dimensions, Edges, and Support
White Travertine Table Tops are cut to project dimensions. Specify the finished length, width, shape, thickness, and any cutouts on a drawing that also identifies the supporting base.
Set Thickness and Geometry
Listed thickness options are 18, 20, and 30 mm; other thicknesses require review against the selected material and design. Show curves, corner radii, and cutout positions on the drawing.
Choose Edges and Overhang
Straight and bullnose are the listed edge profiles. Mark the profile on every exposed edge and dimension the overhang from the base, including any unequal projection around an irregular top.
Match the Top to Its Base
Larger tops and longer overhangs place greater demands on base support. Give STOOANCE the base layout and fixing details for fabrication review, then approve the drawings and project-specific tolerances before cutting.
Approve Samples and Drawings Before Production
Approve the actual stone and fabrication documents before cutting White Travertine Table Tops. Record each decision against a named batch and drawing revision so production has one clear reference.
Compare Sample With Current Slabs
A small sample shows color and texture, but cannot capture every vein, pore, or tonal shift across a natural stone batch.
Current slab or batch photos and video should establish the acceptable color and pore range; identify the selected pieces in the approval record.
Confirm Surface And Direction
The approved sample should identify the polished finish and whether pores are filled, including the acceptable appearance of the fill.
Slab images should mark grain direction and intended placement before pieces are cut.
Sign Drawings And Log Changes
Shop drawings should show dimensions, thickness, edges, cutouts, grain arrows, and piece identifiers, with buyer sign-off before cutting.
For multi-piece orders, record each approval and later change by date, drawing revision, and affected piece numbers; confirm revised instructions with STOOANCE.
Evaluate a White Travertine Table Tops Supplier
White Travertine Table Tops should be sourced against an identifiable current batch, approved drawings, and a documented inspection plan. Ask suppliers to show how they control each step before placing an order.
Verify Material and Batch
Current slab availability, thickness, and color range should be confirmed with dated photos or video. STOOANCE supports remote slab selection and batch reservation, subject to stock confirmation.
Natural pores, fissures, and veining vary. Approve the actual material before fabrication.
Check Fabrication Against Drawings
STOOANCE reviews dimensions, thickness, finish, edges, and cutouts against approved drawings. Ask for evidence that the supplier can cut, shape, and finish the specified tops.
Drawing revisions should be resolved before production.
Review Inspection and Export Records
STOOANCE checks color range, fissures, resin treatment, dimensions, flatness, edges, numbering, and packing. Request inspection photos, labels, and an export packing plan suited to the shipment.
Required certificates should be checked for their current holder, scope, and validity.
Inspect, Pack, and Ship the Finished Tops
Finished White Travertine Table Tops should be released against the approved sample and fabrication drawings. Inspection records and packing details give the receiving team a practical basis for checking the shipment.
Check Each Finished Piece
The approved sample sets the color range; inspect each top for fissures, pore filling, and resin treatment. Drawings govern dimensions, thickness, flatness, polish, and straight or bullnose edges.
The packing list should match the finished quantity and piece numbers. Record any agreed deviations before release.
Record and Protect the Tops
Inspection photos or video should show each face, edge, label, and piece number. Numbering by room or installation sequence helps local installers identify pieces.
Corner protection and waterproof wrapping reduce handling and moisture exposure. Select suitable crates or supports for the top sizes and shipment method.
Confirm Freight Terms
The destination and order review determine the shipping route and available Incoterm. Confirm the agreed handover point, packing specification, and required shipping documents before dispatch.
Common Purchasing Mistakes to Avoid
White travertine varies by batch and has natural pores. Before ordering White Travertine Table Tops, record approvals for the selected stone, fabrication details, and shipment requirements.
Approve the Actual Stone
A small image cannot establish the color range or pore pattern of a full top. Approve current batch photos, video, or a representative sample; inspect the actual material for fissures and any resin treatment. Travertine is acid sensitive, so approve its care requirements for the intended use.
Confirm Finish and Support
A polished finish is listed for this product, but suitability depends on the selected material and application. Approve a finish sample, then document base dimensions, bearing points, overhangs, and any cutouts in the shop drawings.
Release Only Approved Documents
Unapproved drawings leave dimensions, thickness, and edges open to dispute. Sign off on the fabrication drawings before production, and agree on inspection criteria, photo records, protective packing, and delivery terms before shipment.
How Are White Travertine Table Tops Priced?
18, 20, and 30 mm are listed thickness options for White Travertine Table Tops. Compare quotes against the same approved material and delivery basis.
STOOANCE confirms availability and fabrication requirements before quoting. Send a reference image or sample, drawings, dimensions, thickness, finish and fill, edge and cutout details, quantity, packing requirements, destination, and requested Incoterm.
| Cost factor | Request in each quote | What changes cost |
|---|---|---|
| Material and batch | Approved sample and batch | Color range and selection |
| Dimensions and thickness | Piece sizes and thickness | Slab yield and handling |
| Finish and fill | Polish and pore-fill specification | Treatment and finishing work |
| Edges and cutouts | Profiles and dimensioned drawings | Machining complexity |
| Quantity and yield | Piece count and layout | Waste and repeatability |
| Packing | Protection and crate specification | Materials and handling |
| Freight or Incoterm | Destination and delivery term | Transport scope and charges |