Lane Crawford Travertine Tiles
STOOANCE supplies Lane Crawford Travertine Tiles for indoor projects. This natural travertine is listed in beige and grey, with an 18 mm thickness and a honed, matte finish. Tile sizes are customized to project drawings.
Before production, approve the actual material, sample or batch to review its color range, veining, pores and natural variation. STOOANCE can coordinate drawing-based fabrication and provide inspection photos or video, piece numbering and packing records according to the order. Confirm dimensions, edges, quantities and current material availability when requesting a quote.
- Natural travertine in beige and grey
- 18 mm thickness; honed, matte finish
- Project-customized sizes for indoor use
- Sample or batch approval before production
- Order-specific inspection and packing records
Beige and Grey Travertine: Natural Character
Lane Crawford Travertine Tiles are listed in beige and grey, with a honed, matte finish. The restrained color palette can read differently from piece to piece: some tiles may appear warmer or cooler, while markings and tonal transitions vary across the stone. The finish softens reflections, so the material’s color and surface character remain the focus.
Travertine is a natural material. Pores, veining, fissures, and shifts in shade are part of the appearance to review, rather than details that can be assumed uniform. Their visibility can change with the selected batch, surface treatment, and lighting. A small sample may show the general character but cannot represent every tile in a larger order.
For a design that depends on a particular balance of beige and grey, review the actual material and agree on an acceptable color range before production. Viewing several pieces together gives a clearer sense of how the natural variation will read across a larger surface.
Request a Quote
Tile Specifications for Interior Spaces
Lane Crawford Travertine Tiles are listed as natural travertine in beige and grey, with an 18 mm thickness and a honed, matte finish. The listed location is indoor. Tile dimensions are project customized, so the final format should be confirmed for each order.
For an interior design scheme, these specifications provide a starting point for evaluating wall and floor layouts. Confirm the intended room, substrate, traffic level, and installation method before deciding where the tiles can be used. If the project includes wet areas or commercial flooring, request the performance information required by the designer and local rules; the listed finish alone does not establish slip resistance or suitability for those conditions.
Send STOOANCE the application, drawings, required quantities, and destination with your inquiry. The team can then review the material and proposed tile specification against the project requirements before production.
Request a Quote
Custom Sizes From Approved Drawings
Lane Crawford Travertine Tiles are listed in project customized sizes, with a listed thickness of 18 mm and a honed, matte finish. For a custom order, STOOANCE uses the project drawings to define the required pieces before fabrication. Confirm the final thickness and finish against the selected material and application.
Send a dimensioned tile schedule or shop drawings that show:
- Finished length and width for each tile type, plus required quantities.
- Joint widths and the intended layout, including any changes in tile direction.
- Edge profiles, visible edges, and the location and dimensions of any cutouts.
- Room or area references that connect each piece to the drawings.
STOOANCE can review the drawings and discuss cut-to-size production, edge work, and CNC or waterjet cutting where the design requires them. Before production, agree on dimensions, tolerances, finish, and any special fabrication details for the selected travertine. If drawings are still being developed, share the intended layout and application so the team can identify which details need confirmation for a workable quotation.
Request a Quote
Batch Approval, Inspection and Piece Numbering
Before fabricating Lane Crawford Travertine Tiles, STOOANCE asks buyers to approve the actual material or batch. Remote video selection and close-up images can help reviewers assess the beige and grey color range, veining, pores, natural fissures, and any resin treatment. A small sample may not represent every tile, so the accepted range should be agreed before production.
The inspection plan follows the approved sample, drawings, and intended indoor use. For this 18 mm honed tile, the order review should establish the required measurements and acceptable variation; no tolerance or performance value is assumed from the product listing.
- Compare production pieces with the approved batch and agreed color range.
- Check dimensions, thickness, flatness, finish consistency, edges, and visible stone features against the order requirements.
- Verify quantities and match cut pieces to the approved drawings.
- Number pieces by room, elevation, or installation sequence when the layout requires it.
STOOANCE can provide inspection photos or video and numbering records according to the order. Buyers should confirm the review points and documentation needed for their project before fabrication begins.
Request a Quote
Packing and Delivery for Project Tiles
For Lane Crawford Travertine Tiles, packing is planned around the approved tile sizes, order quantity and delivery route. STOOANCE can arrange protective materials and suitable cases or crates for the order, with packing organized by room or installation sequence when the project requires it. The final method is confirmed before dispatch.
A useful delivery plan starts with the project address, receiving schedule, unloading arrangements and any limits on crate size or weight at the site. Share these details with the drawings and packing requirements so STOOANCE can coordinate the shipment and prepare labels and packing records that help the receiving team identify each group of tiles.
Most STOOANCE exports ship through Xiamen Port; the departure port and shipping terms depend on the material origin, destination and order review. EXW, FOB, CIF or DDP may be discussed where suitable. Confirm the selected batch, final quantities, packing method, destination and production schedule to obtain a specific delivery plan and quotation.
Request a QuoteTechnical Specifications
Product Information
- Product
- Lane Crawford Travertine Tiles
- Material / Category
- Travertine
- Material
- Travertine
- Color
- Beige, Grey
- Size
- Project Customized Size
- Thickness
- 18mm
- Finish
- Honed / Matte
- Location
- Indoor
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
Lane Crawford Travertine Tiles FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteHow much can the beige and grey color vary between batches?
The beige and grey tones can vary between batches, but no measured color range is specified for Lane Crawford Travertine Tiles. Natural variation in color, veining, pores and fissures should be assessed on the actual material. STOOANCE can provide remote video selection and photo records, then check the color range against the approved sample or batch. Before production, review the available batch and agree on an acceptable color range for your project.
Can Lane Crawford Travertine Tiles be cut to project-specific sizes?
Yes. Lane Crawford Travertine Tiles are listed in project-customized sizes, and STOOANCE offers cut-to-size stone fabrication. The listed specification is 18 mm thick with a honed/matte finish for indoor use. Final dimensions, thickness, edges, and any cutouts must be confirmed from your drawings and the approved material batch. Send STOOANCE your tile schedule or drawings, required quantities, finish, and destination so the team can check material availability and confirm a fabrication plan and quotation.
Is the listed 18 mm thickness suitable for my installation method?
The listed 18 mm thickness may be suitable, but thickness alone cannot confirm compatibility with your installation method. These travertine tiles are listed for indoor use with a honed/matte finish and project-customized sizes. Share your installation method, tile dimensions, substrate, support conditions, and expected loads with STOOANCE. STOOANCE can review the selected material and fabrication details against your drawings; your installer or project engineer should confirm the final installation specification before you approve the order.
What should I expect from the honed matte finish?
Expect a smooth, low-sheen surface that softens reflections and lets the travertine’s beige and grey tones show naturally. These Lane Crawford Travertine Tiles are specified with a honed matte finish, 18 mm thickness, and indoor use. Natural pores, fissures, veining, and color variation should be assessed on the actual batch; the finish alone does not establish slip performance or suitability for a particular floor. STOOANCE can arrange sample or remote batch review. Next, confirm the intended room and approve the finish and material before fabrication.
Are these tiles suitable for my intended indoor floor or wall application?
Yes, these travertine tiles are listed for indoor use and may suit an indoor floor or wall, subject to review of the specific application. The product information lists beige and grey coloring, an 18 mm thickness, a honed/matte finish, and project-customized sizes. It does not establish slip performance, load suitability, or the appropriate installation method. Tell STOOANCE whether the area is a floor or wall, its expected traffic and moisture exposure, and your required dimensions. STOOANCE can then review the selected batch and drawings before production.
Can STOOANCE arrange remote material selection for Lane Crawford Travertine Tiles?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
Lane Crawford Travertine Tiles: A Buyer’s Guide
Use this guide to decide where these tiles fit, approve the right material and finish, compare suppliers against clear fabrication and inspection criteria, and avoid costly mistakes in sampling, specifications, packing, and international purchasing.
What Are Lane Crawford Travertine Tiles?
Lane Crawford Travertine Tiles are source-listed indoor travertine tiles in beige and grey, with a honed or matte finish. The listed thickness is 18 mm, while tile size is customized to the project rather than fixed in the product description.
Lane Crawford Travertine Tiles is a product designation; the name alone does not verify quarry origin or any third-party affiliation. Buyers should request confirmation of the actual material and production batch before treating a sample as representative of an order.
Natural travertine can show pores, fissures, veining, and shifts in color from piece to piece and batch to batch. Review those features on the proposed batch, especially where adjoining tiles need a consistent visual range.
Where Do Lane Crawford Travertine Tiles Work Best?
Lane Crawford Travertine Tiles are listed for indoor use in an 18 mm honed, matte finish. Match each placement to traffic, moisture, cleaning methods, and the maintenance the site can support.
| Application | Main Exposure | Specification Check |
|---|---|---|
| Interior wall | Splashes | Pore treatment and cleaning plan |
| Dry interior floor | Traffic and abrasion | Load and slip evidence |
| Wet interior floor | Water and slipping | Wet-slip test and waterproofing |
Interior Walls
Indoor walls face limited abrasion and usually avoid standing water.
Travertine’s pores and natural fissures still require an agreed filling approach and cleaning guidance, particularly near sinks.
Interior Floors
Dry interior floors require a review of traffic, substrate, and loads.
For demanding commercial areas, request evidence for abrasion, flexural strength, and slip resistance under applicable local standards.
Wet Floors and Exterior
Wet floors need verified wet-slip results, drainage, waterproofing details, and local installation approval.
Acidic cleaners can etch travertine. Exterior use needs separate exposure and freeze-thaw review because this product is listed for indoor use.
How to Choose Color, Cut, and Finish
Lane Crawford Travertine Tiles are listed in beige and grey with a honed or matte finish. Compare actual batch images or samples under the project’s lighting before choosing a layout.
Compare Color and Vein Direction
Beige and grey batches can differ in tone, pore pattern, and veining. Review several tiles together, then specify whether veins should run consistently or vary across the installation.
Check Pores and Finish
Honed or matte is the listed finish; other finishes require confirmation for the selected material. Agree on filled or unfilled pores and inspect finish consistency: open pores can retain dirt and complicate cleaning.
Verify Floor Suitability
A matte appearance alone does not establish slip suitability. For floors, have the project team verify the selected tile and finish against the intended location, cleaning regime, and applicable local requirements.
Dimensions and Drawings for Lane Crawford Travertine Tiles
Lane Crawford Travertine Tiles are listed at 18 mm thick with project-customized sizing. Turn the approved layout and selected batch into a piece-by-piece fabrication schedule before cutting.
Tile Schedule
Each shop drawing should identify tile dimensions, quantities, room or elevation, and piece numbers. Mark edge profiles and every cutout with its location and size.
The 18 mm thickness should appear on the schedule and be checked against the installation assembly.
Layout And Matching
Travertine can vary across a batch, so show vein direction, joint positions, and the intended layout on the drawings. Identify pieces that must match across adjacent surfaces.
STOOANCE can dry lay and number pieces against an approved arrangement.
Written Fabrication Approval
The selected batch determines feasible tile dimensions and cutting yield. Obtain written confirmation of achievable sizes, dimensional tolerances, and yield before releasing the cutting schedule.
Approved shop drawings should also record joint widths and installation details agreed with the local contractor.
How to Approve Samples and Production Batches
For Lane Crawford Travertine Tiles, start with a reference image, then approve a physical sample before reviewing the current production batch. Record the accepted appearance in a signed production standard.
Approve the Physical Sample
A reference image establishes the intended beige or grey appearance.
The physical sample should establish the acceptable color range, pore structure, natural fissures, filling or resin treatment, and honed finish.
Review the Current Batch
Current slabs or tiles may differ from the sample.
STOOANCE can arrange remote video selection and batch reservation, subject to material availability; review vein direction and the full color range before reserving.
Sign the Production Standard
The approved sample and selected batch should be documented together.
Sign off on the color range, pores, fissures, treatment, finish, and vein direction before fabrication begins.
Quality Checks Before Lane Crawford Travertine Tiles Ship
STOOANCE checks Lane Crawford Travertine Tiles against the approved order before shipment. The inspection plan should define acceptance criteria and any required tests or certificates for the actual batch and destination.
Before Cutting
The approved batch and shop drawings establish the inspection baseline. STOOANCE confirms dimensions, specified 18 mm thickness, honed finish, edge details, and the acceptable range of color, pores, and fissures.
Any test method or certificate requirement belongs in the order specification before production begins.
During Fabrication
Cut tiles are checked for dimensions, thickness, flatness, edge quality, and finish consistency. Visible fissures and any resin treatment are reviewed against the approved material range.
Dry laying helps assess adjoining pieces where pattern alignment or vein direction matters.
Before Packing
Final inspection reconciles piece counts, numbering, labels, and packing with the drawings and order. Photos or video give remote buyers a record of the tile faces and arranged layout before crates close.
How to Evaluate a Travertine Tile Supplier
For Lane Crawford Travertine Tiles, compare suppliers by the evidence they can provide before production and shipment. Confirm current batch access, drawing-based fabrication, finish control, inspection records, packing, and discrepancy procedures.
| Compare | Request | Watch For |
|---|---|---|
| Batch access | Current batch photos | Sample only |
| Fabrication and finish | Approved drawings and finish reference | Unclear specifications |
| Shipment and claims | Inspection, packing, and claim procedure | Missing records |
Batch Access
STOOANCE can check current availability through its stone sourcing network and arrange remote slab selection.
Approve the actual batch and its beige or grey color range before production; stock varies.
Fabrication And Finish
Project drawings should define tile dimensions, 18 mm thickness, edges, and honed or matte finish.
STOOANCE can fabricate cut-to-size pieces and check finish consistency against the approved sample.
Records And Resolution
STOOANCE can provide inspection photos or video, piece numbering, labels, and packing records as agreed for the order.
Before ordering, agree how discrepancies will be reported, documented, and resolved under the contract.
Common Specification and Purchasing Mistakes
Lane Crawford Travertine Tiles require more than a finish and color choice on the purchase order. Resolve appearance, floor suitability, fabrication, and delivery details before production.
Approve the Batch, Not Just a Sample
A small sample cannot show the full beige and grey range, pores, or veining. Approve current batch photos or video and record an acceptable variation range.
Natural variation is expected in travertine. Document which fissures, filled pores, or color shifts are acceptable before treating them as defects.
Verify Wet Floor Suitability
A honed finish alone does not establish slip resistance. For wet floors, obtain test evidence relevant to the selected batch, finish, and local project requirements before approving use.
Complete Drawings and Packing Instructions
Undefined tolerances or vein direction can disrupt a planned layout. Approve shop drawings that specify both before cutting.
Missing spare pieces and packing instructions complicate replacement on site. Confirm spare quantities and labels by room or installation sequence in the order.
Packing, Shipping, and Site Handover
Lane Crawford Travertine Tiles need a packing plan tied to the approved tile sizes and delivery route. Agree on protection, labels, and handover records before dispatch.
Crates and Protection
STOOANCE selects fumigated wooden crates or plywood cases according to the order and destination. Waterproof wrapping, foam, and corner protection help limit transit damage.
Room or installation-sequence packing keeps related pieces together for site handling.
Shipping Records and Terms
STOOANCE can provide piece labels, packing records, and inspection photos or video matched to the order. Confirm the packing list, shipping documents, import requirements, and applicable Incoterm against the destination before dispatch.
Handover to the Installer
Numbered pieces and room-based labels help the receiving team reconcile crates with drawings and reported quantities. The local contractor should inspect deliveries, record damage or shortages promptly, and coordinate installation; overseas installation is normally handled locally.
Pricing and the Final Purchase Decision
Lane Crawford Travertine Tiles are specified as 18 mm, honed or matte indoor tiles with project-customized sizing. For comparable quotations, send each supplier the same drawings, tile schedule, quantity, finish, edge details, packing requirements, destination, and requested Incoterm.
STOOANCE should confirm the selected batch and current availability before finalizing a quotation. Before placing an order, approve the actual material or sample, production drawings, dimensions, finish, inspection scope, packing plan, and delivery terms.
| Quote line item | Basis to compare |
|---|---|
| Material | Selected batch, color range, and availability |
| Fabrication | Tile sizes, cuts, edges, and finish |
| Quality and packing | Inspection records, numbering, and crate requirements |
| Logistics | Freight scope, destination, and Incoterm |