Limra Limestone Tiles with Special Surface Finishes
STOOANCE supplies white Limra limestone tiles for indoor wall cladding, with project customized sizes and a listed 18 mm thickness. Polished is the documented finish; other surface finishes and thicknesses require confirmation against the selected material and drawings.
For a consistent project layout, approve the actual sample or batch before production. STOOANCE can coordinate cut-to-size fabrication, review finish and dimensions, and provide inspection photos, piece numbering, and packing records according to the order. Natural color, pores, fissures, and batch variation should be assessed on the selected stone.
- White limestone for indoor wall cladding
- Project customized tile sizes; 18 mm listed thickness
- Polished finish listed; other finishes subject to confirmation
- Remote material selection and batch review available
- Inspection and packing records arranged according to the order
White Limra Limestone and Natural Variation
STOOANCE lists these Limra limestone tiles as white. For a project where the wall’s overall colour matters, review the actual material rather than relying on the product name or a single reference image. A sample can help establish the intended look, while the selected batch shows the range that will appear across the order.
Limestone is a natural material, so colour, veining, pores and fissures may vary from tile to tile and between batches. These features should be assessed on the material offered for the project. Agree on an acceptable colour range and identify any pieces that need separate review before production.
STOOANCE can support remote video selection and photo records of the proposed batch. For larger areas, reviewing several tiles together helps buyers and designers judge how the natural variation reads across a continuous surface. Confirm the approved sample or batch and the acceptance criteria with STOOANCE before the order proceeds.
Request a Quote
Tile Sizes, Thickness, and Polished Finish
Limra Limestone Tiles with Special Surface Finishes are listed for project-customized sizing, with 18 mm as the stated thickness and other thicknesses available for customization. The product listing names polished as the finish. Although the product name refers to special surface finishes, confirm any finish beyond polished for the selected material before specifying it.
- Tile size: Provide the required width, length, quantity, and any size schedule so the proposed pieces can be checked against the selected material.
- Thickness: Specify whether 18 mm meets the project requirements or request a review of a different thickness.
- Polished finish: Approve a finish sample from the proposed batch, including the appearance expected under the project’s lighting.
Final sizes and thickness should account for the intended fixing method and the project’s dimensional requirements. Ask STOOANCE to confirm material availability, fabrication suitability, and the approved finish against the actual batch before production. If a different surface treatment is required, identify it explicitly in the inquiry rather than relying on the product name.
Request a Quote
Coordinating Limra Limestone Interior Walls
White Limra limestone tiles can provide a quiet backdrop for indoor wall cladding, from a feature wall to a larger continuous surface. Plan the wall alongside adjacent flooring, cabinetry, metalwork, and paint so the stone’s natural variation feels intentional within the room.
For a broad wall, decide how tile joints should align with corners, openings, and other architectural features. Review the proposed layout under the lighting planned for the space: daylight, grazing light, and warm or cool lamps can each change how the surface appears. A physical sample viewed beside the neighboring finishes helps the design team judge the overall effect.
Confirm the intended wall conditions with the local installer, including the substrate, fixing method, movement joints, and any areas exposed to moisture. If the design calls for a surface treatment beyond the listed polished finish, ask STOOANCE to confirm whether it is suitable for the selected material and available for the order. Overseas installation is normally handled by qualified local contractors.
Request a Quote
From Shop Drawings to Approved Tiles
For a drawing-based Limra limestone tile order, STOOANCE reviews the selected material and proposed layout before fabrication. Approve an actual sample or batch so the accepted colour range and natural features are clear. Any finish beyond the listed polished option should be checked for suitability and approved before production.
Send the drawings and the following order details together so the fabrication scope can be checked against the intended installation sequence:
- Tile dimensions, quantities, 18 mm or requested custom thickness, and the locations assigned to each piece.
- Finish, exposed-edge details, cutouts, and any required vein direction or layout matching.
- Specified dimensional tolerances and the approved reference sample or batch.
- Piece numbers, drawing references, labelling sequence, packing requirements, destination, and required schedule.
STOOANCE can review a dry lay where the layout calls for one, then check dimensions, thickness, flatness, finish, edges, quantities, numbering, and packing against the approved order. Inspection photos or video and packing records can be arranged according to the order. Confirm current material availability, achievable tolerances, and the production schedule after the drawings and selected batch are reviewed.
Request a QuoteTechnical Specifications
Product Information
- Product
- Limra Limestone Tiles with Special Surface Finishes
- Material / Category
- Limestone
- Color
- White
- Size
- Project Customized Size
- Thickness
- 18mm, Other Customized Thickness
- Finish
- Polished
- Location
- Indoor, Wall Cladding
- Material
- Limestone
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
Limra Limestone Tiles with Special Surface Finishes FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteHow should buyers approve the colour and natural variation of Limra limestone tiles?
Approve the colour and natural variation of Limra limestone tiles against the actual selected batch or a representative sample before production. Review several pieces together for the acceptable range of white tones, veining, pores, and natural fissures; a single sample may not show the full range. STOOANCE can support remote video selection and batch reservation, subject to current availability. Next, agree on the acceptable range and finish, then have STOOANCE confirm them against the selected material and project drawings.
Is polished the only confirmed finish for this product?
Yes. Polished is the only finish confirmed in the product information for these Limra Limestone Tiles. STOOANCE also offers other stone finishes, including honed, brushed, leathered, flamed, and sandblasted, but their suitability and availability for this specific limestone have not been confirmed. If you need a different surface, tell STOOANCE the intended indoor wall application and desired appearance. Ask for a sample from the proposed batch and confirm the finish before approving production.
Can a different surface finish be requested for the selected material?
Yes. You can request a different surface finish for Limra Limestone Tiles. The product information lists polished as the specified finish; any alternative needs STOOANCE to confirm that it suits the selected material and batch. STOOANCE offers finishes such as honed, brushed, and sandblasted where the stone is suitable. Send your preferred finish, a reference sample or image, tile dimensions, thickness, quantity, and intended indoor wall application. STOOANCE can then confirm feasibility and the finish for approval before production.
Can the tiles be made to project-specific dimensions?
Yes. Limra Limestone Tiles are listed in project-customized sizes, and STOOANCE offers drawing-based cut-to-size fabrication. The listed thickness is 18 mm, with other thicknesses available for review; the listed finish is polished. Final dimensions, thickness, finish, edges, and any cutouts must be confirmed against your drawings and the selected material before production. Send your tile schedule, drawings, quantities, and finish requirements so STOOANCE can confirm what is feasible and prepare a quotation.
Is a thickness other than 18 mm available?
Yes. The product information lists 18 mm and other customized thicknesses for Limra Limestone Tiles. STOOANCE can review a requested thickness as part of drawing-based fabrication, but availability and suitability depend on the selected material and batch, tile dimensions, polished finish, and indoor wall-cladding requirements. Send your target thickness, sizes, quantity, and drawings so STOOANCE can confirm the feasible specification before quoting or production.
Can STOOANCE arrange remote material selection for Limra Limestone Tiles with Special Surface Finishes?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
Limra Limestone Tiles with Special Surface Finishes: Buyer’s Guide
Use this guide to match Limra limestone, surface finish, and tile specifications to your project. Compare supplier evidence, approve representative samples, and avoid ordering mistakes that can affect appearance, fabrication, and delivery.
What Are Limra Limestone Tiles with Special Surface Finishes?
Limra Limestone Tiles with Special Surface Finishes are white limestone tiles offered in project-customized sizes. The product record lists 18 mm thickness and allows other customized thicknesses, subject to confirmation for the selected material and order. Its listed finish is polished, and its stated application is indoor wall cladding.
18 mm should be checked against the approved drawings and the actual stone batch before fabrication. The words ‘special surface finishes’ in the product name do not confirm that any particular alternative finish is suitable or available. If a different finish is proposed, approve a representative sample made from the actual stone and batch before production.
Where Are These Limestone Tiles Suitable?
The product listing identifies indoor wall cladding as the application for these white limestone tiles. Treat any other use as a separate specification decision requiring approval against the actual batch and project conditions.
Indoor Wall Cladding
Indoor wall cladding is the documented use. Confirm the substrate, tile weight, fixing method, and movement joints with the project designer and local installer.
Natural color variation, pores, and fissures can remain visible across an installed wall; review the approved batch in the intended lighting.
Floors And Wet Areas
Floors and wet areas introduce wear, slip, moisture, and cleaning demands beyond the listed wall application. Request relevant test evidence for the selected material and finish before specifying either use.
Acidic cleaners can etch limestone; agree on a compatible cleaning regime before approval.
Exterior And High Traffic Spaces
Exterior walls require a project-specific review of exposure, substrate, anchoring, and local code requirements. High-traffic spaces also need evidence suited to expected wear and maintenance.
STOOANCE can review drawings and the proposed batch; the project designer should approve suitability and fixing details.
Finishes for Limra Limestone Tiles with Special Surface Finishes
The product listing identifies polished white Limra limestone for indoor wall cladding. Honed, brushed, leathered, and sandblasted finishes are potential alternatives; each needs a trial on the selected batch and availability confirmation.
| Finish | Visual Effect | Suitability Check | Care Implication |
|---|---|---|---|
| Polished | Reflective | Source listed | Wipe marks promptly |
| Honed | Matte | Trial required | Watch for stains |
| Brushed | Soft texture | Trial required | Clean recesses |
| Leathered | Uneven texture | Trial required | Clean contours |
| Sandblasted | Granular matte | Trial required | Remove trapped dust |
Polished Surface
Polishing brings out color and reflects light. Check the approved sample for gloss consistency, pores, and any visible repairs.
Low Sheen Alternatives
Honed, brushed, and leathered surfaces soften reflections differently. Compare physical samples under the project’s lighting before specifying one.
Textured Surface Care
Sandblasting creates a granular appearance that can retain more dust. Confirm whether the selected limestone accepts the process evenly.
How to Approve Limra Limestone Tiles with Special Surface Finishes
Limra Limestone Tiles with Special Surface Finishes require approval against actual stone and the specified finish. Set the visual acceptance range before cutting begins.
Review the Physical Finish Sample
A physical tile sample shows surface texture and color more reliably than a screen. Review it under the lighting planned for the installation.
The approved sample should identify the finish and material batch where known.
Inspect the Proposed Batch
Photos or video of the proposed batch reveal variation beyond one sample. Ask STOOANCE to show tiles together and close views of pores, fissures, and any resin treatment.
Agree the acceptable color and pore range before production.
Keep a Production Reference
A small sample cannot represent every natural tile. For prominent walls or large orders, a larger mockup or dry lay helps judge the overall range and placement.
Retain a signed sample or approved photographic reference with the order.
Dimensions, Drawings, and Fabrication Details
Limra limestone tiles are listed in project-customized sizes, with 18 mm and other customized thicknesses subject to confirmation. Lock the cutting information before fabrication begins.
Tile Schedule and Cutting Details
The tile schedule should give each piece’s length, width, quantity, and confirmed thickness. Mark edge profiles and cutouts against the relevant drawing references.
Shop drawings should also show the joint plan and tile orientation. Resolve conflicts between the schedule and drawings before cutting.
First-Piece Approval and Tolerances
The first fabricated piece lets the buyer check dimensions, edges, and finish against the approved drawings. Record approval before repeating the cut.
Agreed tolerances belong in the order documents. Confirm them for the selected material, thickness, and application.
Numbering for Installation
Piece numbers should match the shop drawings and installation sequence. Labels by wall or elevation help local installers place each tile.
What Quality Checks Matter Before Shipment?
STOOANCE checks each Limra limestone tile order against the approved sample or batch, drawings, and agreed terms. Buyers should define acceptable natural variation before production and request records at each inspection stage.
Pre-Production Reference
The approved sample or batch sets the color range and reference for visible pores and fissures. Drawings and order terms establish dimensions, thickness, finish, edge details, quantities, and any agreed resin treatment.
Checks During Fabrication
Cut pieces should be measured for dimensions, thickness, and flatness during production. Inspect finish consistency and edge quality against the approved reference; document any resin-treated areas so buyers can assess their appearance.
Final Inspection Records
Before shipment, reconcile piece counts and labels with the packing list and drawings, then inspect crate protection. Request measurement photos, close-up images of pores, fissures, finishes, and edges, plus video or a numbered dry-lay record for patterned layouts.
How to Evaluate a Limestone Tile Supplier
Limra Limestone Tiles with Special Surface Finishes should be evaluated against an approved material sample and the actual production batch. Ask the supplier to show how approval carries through fabrication and shipment.
Traceability and Finish Trials
STOOANCE can check current stock, arrange remote video selection, and reserve an approved batch; availability requires confirmation.
A finish trial on the selected material should establish the acceptable appearance before production.
Drawings and Fabrication
STOOANCE reviews drawings, dimensions, thickness, edges, and finish before cutting. Ask for confirmation that the chosen batch and fabrication route suit every specified component.
Piece numbering and dry lay can help verify complex layouts.
Records and Delivery Responsibility
STOOANCE can provide inspection photos or video, labels, and packing records according to the order. Check how finished tiles will be protected for export.
Any certificate or test document needs its holder, scope, and validity confirmed; identify the local contractor responsible for overseas installation.
Packing, Shipping, and Receiving Decisions
Limra limestone tiles need packing that protects their edges and preserves the installation sequence. Set the packing and shipping instructions before production so the receiving team can check the delivery against them.
Select and Label the Packing
Choose fumigated wooden crates or plywood cases to suit tile size and handling needs. Specify moisture protection and foam or corner guards for exposed edges.
Label pieces and pack by room, elevation, or installation sequence when the drawings require it.
Confirm Shipment Arrangements
Agree the shipping term, departure port, destination requirements, and delivery schedule for the order. Confirm which documents the buyer needs, including the invoice, packing list, and applicable transport or customs paperwork.
Inspect Before Installation
At receipt, photograph crate condition and check quantities and piece labels against the packing list. Record visible breakage or moisture damage before unpacking proceeds, and notify the carrier and STOOANCE promptly.
Resolve discrepancies before the local contractor begins installation.
Common Buying Mistakes and How to Avoid Them
Limra limestone’s white appearance and surface treatment can vary across a production batch. Approval records should define what buyers will accept before cutting and packing.
Approve Color Across the Batch
Screen images shift with lighting and display settings; inspect physical pieces under project lighting before approving color.
A small sample cannot represent every tile; approve the actual batch’s acceptable shade range.
Test Finishes and Detail Fabrication
Special finishes interact differently with limestone texture. Request a finish trial on the selected material before approving production.
Drawings should show every exposed edge and cutout; sign off a first piece.
Set Tolerances and Check Labels
Undefined tolerances create fit problems; agree measurable limits for size, thickness, flatness, and edge quality on the drawings.
Unlabeled mixed pieces delay installation; check piece numbers against room or elevation schedules before shipment.
What Determines Price and Quotation Scope?
STOOANCE prices each Limra limestone order against its selected batch and fabrication scope. Tile dimensions, thickness, finish, and edge work affect processing requirements.
STOOANCE confirms material availability, the production schedule, and destination before issuing an order-specific quote. Send drawings and the decisions below together so the quote covers the intended material, packing, and delivery scope.
| Cost driver | Buyer decision | Quotation information needed |
|---|---|---|
| Selected batch | Approve actual material | Batch reference or sample |
| Tile dimensions | Set tile format | Sizes and layout drawings |
| Thickness | Choose required thickness | Thickness specification |
| Finish | Approve surface appearance | Finish sample or reference |
| Fabrication | Define edge work | Cutting and edge drawings |
| Quantity | Confirm order scope | Required pieces by size |
| Packing | Choose packing method | Destination handling requirements |
| Shipping term | Agree delivery basis | Incoterm and destination |