Honed Finish Grey Limestone Tiles
STOOANCE Honed Finish Grey Limestone Tiles offer a matte natural stone surface for indoor flooring projects. Listed thicknesses are 18 mm and 20 mm, with tile sizes customized to approved project drawings. A polished finish is also listed as an option.
Before fabrication, approve the actual material or batch to establish the acceptable color range and natural variation. STOOANCE supports remote material selection, drawing-based fabrication, and inspection records matched to the order. Confirm availability, dimensions, edges, and finish when requesting a quotation.
- Grey limestone for indoor floors
- Honed matte finish; polished option listed
- 18 mm or 20 mm listed thicknesses
- Project-customized tile dimensions
- Photo or video inspection and packing records available according to the order
Grey Limestone with Natural Character
These grey limestone tiles offer a restrained natural stone appearance. The honed surface has a matte look that softens reflections, allowing the stone’s colour and markings to remain the focus. Because “grey” describes a colour family rather than a fixed shade, the tone may appear warmer or cooler under different lighting.
Each tile is cut from natural limestone. Changes in colour, veining, pores and fissures are part of the material, and their visibility can differ from piece to piece. A product image gives a useful first impression, but it cannot establish the full appearance of every tile in an order.
For a large, continuous floor, consider how this variation will read across the whole area. Review actual material from the proposed batch under lighting similar to the project space, then agree on an acceptable colour range. This gives designers and buyers a clearer basis for choosing between a more blended layout and one that makes natural variation more visible.
Request a Quote
Tile Size, Thickness and Finish Options
Plan the tile schedule around the room grid, laying pattern, and junctions with adjacent materials. Share the intended joint width and perimeter details so the cutting schedule can account for full tiles, border pieces, and transitions.
| Specification | Listed option | Confirm for the order |
|---|---|---|
| Tile size | Project-customized | Finished dimensions and quantities for each tile type |
| Thickness | 18 mm or 20 mm | Selected thickness for each area and adjoining floor levels |
| Surface finish | Honed / matte or polished | Approved finish sample and edge treatment |
The product name identifies the honed option; polished is also listed in the product information. Request a sample of the selected finish to judge its appearance under the project’s lighting. Final dimensions and finish should be agreed against the chosen material and drawings before fabrication; availability and production details require order-specific confirmation.
Request a Quote
Planning Indoor Grey Limestone Floors
Honed Finish Grey Limestone Tiles are listed for indoor floors. Their matte surface can suit spaces where a quieter visual effect is preferred, including residential rooms and interior circulation areas. For a consistent layout, plan tile direction, joint width, transitions, and the placement of cut pieces before fabrication.
Suitability depends on how the floor will be used. For entrances, wet areas, or other locations with specific slip requirements, ask the project designer to confirm the required performance and request testing for the selected material and finish. The substrate, installation method, and movement joints should also be specified by the local installation team.
Limestone requires a care plan appropriate to the setting. Discuss sealing, cleaning products, and expected exposure to spills with the installer or stone-care specialist; acidic cleaners can damage limestone. STOOANCE supplies and fabricates the tiles, while overseas installation is normally handled by qualified local contractors.
Request a Quote
Custom Cutting Starts With Clear Drawings
STOOANCE can cut grey limestone tiles to project dimensions for indoor flooring. Before fabrication, the team reviews the drawings against the selected material and the intended layout. This helps identify pieces that need special cuts and keeps the cutting plan tied to the approved design.
- Provide a dimensioned floor plan showing tile sizes, layout direction, joint widths, and the locations of walls, columns, and openings.
- Mark thresholds, steps, drains, and other areas that need shaped or cut pieces; include detail drawings where a plan view is insufficient.
- Identify exposed edges and any required edge treatment, and show how tiles should meet adjacent materials.
- Share the drawing revision and piece references to be used for fabrication so changes can be reviewed before cutting.
Dimensions, thickness, finish, edges, and cutouts are confirmed from the final drawings. If the layout depends on a particular visual direction or alignment, flag it during drawing review. STOOANCE can then discuss the cutting approach and any practical questions with the project team before production.
Request a Quote
Batch Approval and Order Inspection
Before production, approve a sample or the actual grey limestone batch for the order. A small sample may not show the full range of a natural stone lot, so review available slab photos or video for color variation, pores, fissures, and any resin treatment. STOOANCE can support remote selection and batch reservation; current availability and the final selection must be confirmed.
STOOANCE reviews the approved material alongside the order requirements, then checks the finished tiles against the agreed dimensions, thickness, honed finish, edge details, color range, flatness, and quantities. For these tiles, confirm whether the order calls for 18 mm or 20 mm thickness and which inspection criteria apply to the intended indoor floor. Any required test results or project-specific tolerances should be agreed before production.
Inspection photos or video, piece labels, numbering, and packing records can be provided according to the order. Agree on the required records and packing method before shipment so your receiving team can identify each batch and reconcile delivered pieces with the approved order.
Request a QuoteTechnical Specifications
Product Information
- Product
- Honed Finish Grey Limestone Tiles
- Material / Category
- Limestone
- Material
- Limestone
- Color
- Grey
- Size
- Project Customized Size
- Thickness
- 18mm, 20mm
- Finish
- Honed / Matte, Polished
- Location
- Floor, Indoor
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
Honed Finish Grey Limestone Tiles FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteHow does a honed finish differ from a polished finish on these grey limestone tiles?
A honed finish gives these grey limestone tiles a matte, low-reflection surface; a polished finish has a glossier, more reflective appearance and may make the grey look deeper. Both finishes are listed for this product, which is specified for indoor floors in project-customized sizes and 18 mm or 20 mm thicknesses. Appearance varies with the actual stone batch, and slip resistance cannot be inferred from the finish name alone. Ask STOOANCE for samples of the selected batch and confirm the finish and any floor-performance requirements before production.
How should I choose between 18 mm and 20 mm thickness?
Choose 18 mm if the project specification approves it for your indoor floor; choose 20 mm if the specification requires 20 mm. Both thicknesses are listed for these honed grey limestone tiles, but thickness alone does not establish suitability for a particular floor. Have your architect or installer confirm the substrate, loading, tile size, and installation method. Then send STOOANCE the drawings and preferred thickness so it can confirm the selected material, batch, dimensions, finish, and current availability before quoting.
Can the tiles be cut to dimensions shown on my project drawings?
Yes. STOOANCE can cut these grey limestone tiles to dimensions shown on your project drawings. The product is listed in project-customized sizes, with 18 mm and 20 mm thickness options. Final dimensions, tolerances, edge details, and any cutouts must be checked against the selected material and approved drawings before production. Send your drawings, required thickness and finish, quantities, and destination so STOOANCE can confirm feasibility and prepare a quotation.
Are these tiles suitable for wet indoor floors, and what slip-resistance information should be checked?
Suitability for wet indoor floors has not been established. These grey limestone tiles are listed for indoor floors in honed/matte or polished finishes, but the product information provides no wet slip-resistance result. Before specifying them, ask STOOANCE for test results for the selected finish and batch, including the test method and wet-condition rating. Compare those results with the requirements for the intended space and local code. Confirm the material and finish with an approved sample before production.
How much colour and surface variation should I expect between tiles?
Expect natural variation in grey tone, veining, pores, and fissures between tiles. The exact range depends on the selected limestone batch, so a photo alone cannot establish what your shipment will look like. The specified honed finish is matte, but surface texture and finish consistency should be reviewed on actual material. STOOANCE can support remote video selection and check colour range and finish against the approved sample or batch. Before production, approve the batch and agree on the acceptable variation and layout requirements.
Can STOOANCE arrange remote material selection for Honed Finish Grey Limestone Tiles?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
Honed Finish Grey Limestone Tiles: A Buyer’s Guide
Use this guide to assess where grey limestone fits, compare finishes and specifications, approve samples, and evaluate suppliers. It also identifies purchasing mistakes that can affect appearance, fabrication, inspection, and delivery.
What Are Honed Finish Grey Limestone Tiles?
Honed Finish Grey Limestone Tiles are natural stone tiles with a smooth, matte surface produced by honing. The finish softens reflected light while leaving the stone’s natural texture and markings visible.
STOOANCE lists this product for indoor flooring, with project-customized sizes and 18 mm or 20 mm thickness options. Those listed attributes describe the product offering; the selected material and finished pieces should be checked against the project specification.
Natural limestone varies from batch to batch in grey tone, pores, veining, and fissures. Approve the actual batch or representative sample before treating a photograph as a color standard. A commercial stone name alone does not verify geological classification or establish performance for a particular application.
Where Are Honed Grey Limestone Tiles Suitable?
Honed Finish Grey Limestone Tiles are listed for indoor floors, with project-customized sizes and 18 mm or 20 mm thicknesses. Match the selected tile and installation design to the room’s traffic, moisture, and maintenance.
Traffic and Wear
Limestone can show scratches and traffic wear, especially where grit is tracked across the floor. Evaluate entrance routes and busy corridors against the expected service conditions.
A honed surface may make minor wear less conspicuous, but it does not prevent it.
Moisture and Cleaning
Limestone is vulnerable to acidic cleaners and spills; liquids can also leave stains. Specify suitable cleaning products and a maintenance plan for the actual material.
Wet areas need separate review of moisture exposure, installation details, and applicable local requirements.
Slip and Material Approval
A honed appearance does not establish a slip rating. Request material-specific test data under the applicable local standard where slip resistance is specified.
For demanding traffic or persistent moisture, compare alternative stones or flooring materials before approval.
Honed Finish Grey Limestone Tiles Versus Other Finishes
Honed Finish Grey Limestone Tiles have a matte surface; polished tiles reflect more light. Compare finishes on the approved material under the project’s lighting, since grey tone and surface variation can read differently.
| Finish | Appearance | Wear And Care | Setting |
|---|---|---|---|
| Honed/matte | Soft, low reflection | Scuffs less conspicuous; avoid acids | Understated indoor floors |
| Polished | Reflective, stronger visual contrast | Scratches and etching more conspicuous | Indoor areas favoring sheen |
| Brushed/textured | Varies by process | Confirm cleaning needs | Confirm material suitability |
Appearance And Visible Wear
Honed surfaces diffuse reflections and may make minor scuffs less conspicuous. Polished surfaces emphasize color and veining, but scratches and acid etching can be more visible.
Cleaning And Intended Setting
Both finishes need a cleaning plan suited to limestone; acidic cleaners can etch either surface. Honed suits understated indoor floors, while polished suits areas where reflection is desired.
Texture And Slip Verification
Brushed or textured finishes require confirmation against the selected stone and production route. Finish names alone do not establish slip resistance; request testing against the applicable project standard where required.
How to Approve Honed Finish Grey Limestone Tiles Samples
Honed Finish Grey Limestone Tiles should be approved against a representative range, not a single attractive cut. Use the intended room lighting and retain a written approval record.
Review the Material Range
Several tiles from the proposed batch reveal shade shifts and veining that a small sample can hide. Compare them together under project lighting, including daylight and artificial light where relevant.
Inspect the Surface
Natural pores, fissures, and any resin-filled areas should be visible in the reviewed pieces. Agree which features and repairs are acceptable, then photograph the approved shade range and honed texture.
Approve the Actual Batch
The actual batch or selected slabs should receive final approval before cutting. STOOANCE can support remote video selection, but screens cannot confirm exact color or surface feel; request labeled reference photos and physical samples when these details are critical.
Dimensions, Thickness, and Drawing Requirements
Project drawings should define the finished tile size, thickness, and placement of Honed Finish Grey Limestone Tiles. Confirm the selected batch and fabrication plan before treating any custom dimension as available.
Dimensions and Thickness
18 mm and 20 mm are listed thicknesses; confirm availability for the selected material and batch.
Cut-to-size dimensions need a schedule showing finished sizes and quantities by room.
Layout and Edge Details
A floor layout should show joint widths, pattern direction, and transitions. Mark exposed edges, profiles, and every cutout on the drawings.
Piece numbers should match the layout and packing labels.
Tolerances and Yield
Agree dimensional and thickness tolerances for the chosen limestone and application before production.
Cutouts, edge profiles, and natural fissures affect usable slab yield; review the cutting plan before finalizing quantities.
Fabrication and Quality Checks Before Shipment
Honed Finish Grey Limestone Tiles should be checked against an approved sample, production drawings, and the agreed inspection plan. Record decisions at first-piece production so later checks use the same reference.
Sample Approval
The approved sample should establish the acceptable grey shade range, natural fissures, and any resin treatment. Confirm the honed finish and edge detail against the selected batch before cutting.
First-Piece Production
The first finished tile provides a practical check of thickness, dimensions, flatness, finish consistency, and edges against the drawings. Resolve discrepancies before producing the full order.
Final Inspection And Records
Final inspection should reconcile quantities, piece numbers, labels, and packing with the order. For drawing-based layouts, a dry lay and photo or video records help verify placement and shade distribution before shipment.
How to Evaluate a Grey Limestone Tile Supplier
Honed Finish Grey Limestone Tiles require more than a matching catalog photo. Assess whether a supplier can identify the current batch, reproduce the approved finish, and document the route from selection to shipment.
Verify Material and Fabrication
Current block or slab availability should be checked against the required grey range, thickness, and quantity.
Project drawings should be reviewed for cutting, edge details, and yield before a production schedule is accepted.
Trace Approval Through Inspection
The approved sample must link to an identified production batch; ask how substitutions are controlled.
STOOANCE can support remote slab selection, batch reservation, inspection photos, and piece numbering when specified in the order.
Confirm Packing and Responsibilities
Export packing plans should identify crate protection, labels, and the relationship between numbered pieces and drawings.
Before purchase, confirm the scope and validity of requested documents, the production schedule, inspection records, and responsibility for delivery and local installation.
Common Buying Mistakes and How to Avoid Them
Honed Finish Grey Limestone Tiles require approvals tied to the actual order. A color impression or generic sample cannot settle batch appearance, floor suitability, or fabrication details.
Screen Color and Small Samples
Screen colors vary with lighting and display settings. Approve a physical reference under the project’s intended lighting.
A small sample shows only part of the stone’s range. Review current batch photos or video and approve the acceptable variation before cutting.
Unverified Wet-Floor Use
A honed finish alone does not establish wet-floor suitability. Obtain test data for the selected material and finish against local project requirements.
Wet-area approval should specify the intended location. Have the designer or local contractor confirm the installation system.
Missing Fabrication and Packing Details
Drawings should identify exposed edges, joint positions, and layout direction. Sign off on these details before fabrication.
Crate labels should match piece numbers and installation areas. Agree on replacement-material availability and batch matching before dispatch.
From Quotation to Packing and Delivery
For Honed Finish Grey Limestone Tiles, send reference images, drawings, dimensions, thickness, finish, quantity, destination, and required schedule with the quotation request. STOOANCE can then check current availability and the suitable production route.
Confirm Material and Shop Details
Current stock and batch availability require confirmation before the order is fixed.
The approved batch, shop drawings, edge details, and any cutouts should be recorded before fabrication.
Inspect and Label the Order
STOOANCE can provide inspection photos or video against the approved material and order details.
The packing list should match piece numbers and labels organized by room or installation sequence.
Record Packing and Delivery Terms
The order should specify protective crates, waterproof and corner protection, and the agreed Incoterm and destination.
Overseas installation is normally handled by qualified local contractors; record that responsibility in the order.
Pricing and Total Purchase Cost
STOOANCE quotes Honed Finish Grey Limestone Tiles against the approved material, fabrication scope, and delivery terms. Prices, minimum quantities, and lead times require a current project-specific quotation.
| Cost component | Buyer must confirm | Pricing implication |
|---|---|---|
| Material and batch | Approved sample, shade range, selected lot | Availability and matching affect selection |
| Dimensions, yield, thickness | Tile schedule, cutting layout, 18 mm or 20 mm | Yield and material use vary |
| Fabrication | Honed finish, edges, cutouts, numbering | Drawing complexity affects processing |
| Inspection | Acceptance criteria, dry lay, photo records | Inspection scope affects handling |
| Packing and freight | Crate protection, load plan, Incoterm, route | Shipping basis affects landed cost |
| Destination charges | Duties, taxes, clearance, local delivery | Confirm with destination agent |