White Limestone Wall Tiles
STOOANCE supplies white limestone wall tiles with a polished finish for indoor projects. Tiles can be cut to project drawings, with 18 mm, 20 mm, and 30 mm thicknesses listed for this product. Confirm the selected thickness, dimensions, edges, and application before production.
Because limestone is a natural material, color, veining, pores, and fissures can vary. Review the actual sample or batch to agree on the appearance and finish. STOOANCE can support remote material selection, fabrication, inspection records, and labeled packing for project orders.
- White natural limestone with a polished finish
- Project customized sizes based on approved drawings
- Listed thicknesses: 18 mm, 20 mm, and 30 mm
- Remote selection and batch approval supported
- Inspection photos, numbering, and packing records available according to the order
White Limestone Character and Natural Variation
White Limestone Wall Tiles offer a light natural-stone palette for projects seeking a restrained wall surface. “White” describes the product’s color category, not a promise of a uniform shade. The appearance of each tile should be judged from the actual material selected for the order.
Natural limestone can show differences in tone, markings, pores and fissures, both within a tile and across a batch. These features affect how a wall reads as a whole, especially where many pieces sit together. A small reference sample may help establish the desired look, but it cannot show every variation in a larger order.
Before approval, review current material images or video and agree on the acceptable color range and natural characteristics. If a consistent appearance across adjoining walls matters, ask STOOANCE to present pieces from the proposed batch for review. The final selection should be based on that material rather than an assumption that every tile will match a single photograph.
Request a Quote
Custom Sizes, Thicknesses and Polished Finish
STOOANCE offers these white limestone wall tiles in project-customized sizes with a polished finish. The format can be planned around the wall layout, helping designers coordinate tile proportions, joints and visible edges.
- Dimensions: Provide the required width and height for each tile type, plus quantities. Include units and any limits set by the wall layout.
- Thickness: The product listing specifies 18 mm, 20 mm and 30 mm. Identify the preferred option so suitability for the selected material and wall system can be reviewed.
- Finish: Polished is the listed finish. Specify which edges will remain visible and whether they need a matching finish.
Final sizes and thickness should be confirmed against the selected material, fabrication requirements and installation design before an order is placed. A polished surface reflects light, so review a physical sample under the project's lighting when its appearance is important. Installation details and any required performance criteria should be checked by the project team for the intended wall system.
Request a Quote
Indoor Wall Applications and Design Coordination
White Limestone Wall Tiles can be considered for indoor feature walls, reception areas, corridors, residential spaces, and stairwell walls. Their white color and polished finish offer a restrained backdrop for timber, metal, and other interior materials. Review the actual stone under the project’s lighting, since daylight and artificial light can change how the wall appears.
For a coordinated installation, establish the tile layout alongside door openings, corners, switches, lighting fixtures, and adjoining finishes. Agree on joint placement, visible edges, and transitions before fabrication so the stonework fits the elevations. Large or prominent walls may benefit from a reviewed layout showing the intended placement of each piece.
The project team should confirm the wall substrate, fixing method, and any exposure to moisture or heavy use with a qualified local installer. STOOANCE supplies and fabricates the stone; overseas installation is normally handled by local contractors. Share the wall elevations and site conditions when requesting a proposal so material selection and detailing can be reviewed for the intended space.
Request a Quote
From Approved Drawings to Numbered Pieces
STOOANCE fabricates White Limestone Wall Tiles from approved project drawings. Send dimensioned wall elevations and a piece schedule showing locations, joints, returns, openings, edge details and cutouts. Final dimensions and tolerances are confirmed against the selected material and order requirements before cutting.
Approve the actual material batch or sample before production. Remote video selection and batch reservation can support that decision, subject to current availability. If the layout calls for a particular vein direction or arrangement, mark it on the drawings for approval.
- Check fabricated pieces against the approved dimensions, thickness, finish and edge details.
- Use a dry lay when the approved layout requires a review of how adjacent pieces align.
- Number pieces by room, elevation, drawing or installation sequence.
- Match labels and packing records to the numbered piece schedule for site sorting.
Inspection photos or video and numbering records can be provided according to the order. Agree the piece schedule with the local installer before production; qualified local contractors normally handle overseas installation.
Request a QuoteTechnical Specifications
Product Information
- Product
- White Limestone Wall Tiles
- Material / Category
- Limestone
- Material
- Limestone
- Size
- Project Customized Size
- Thickness
- 18mm, 20mm, 30mm
- Finish
- Polished
- Location
- Indoor, Stair
- Color
- White
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
White Limestone Wall Tiles FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteWhat thicknesses are listed for these white limestone wall tiles?
The listed thicknesses for these white limestone wall tiles are 18 mm, 20 mm, and 30 mm. These are product options, not confirmation that every thickness is currently available for a particular batch or project. STOOANCE reviews the selected material, dimensions, finish, drawings, and application before production. Share your required tile size, quantity, and wall details so STOOANCE can confirm the appropriate thickness and current availability.
Can the tiles be cut to project-specific dimensions?
Yes. STOOANCE can cut White Limestone Wall Tiles to project-specific dimensions. The product is listed with project-customized sizing and 18 mm, 20 mm, or 30 mm thickness options. Final dimensions, thickness, polished finish, edge details, and any cutouts must be confirmed from your drawings and the selected material before production. Send your drawings, quantities, and required thickness so STOOANCE can review fabrication and provide a quotation.
Is a finish other than polished available for the selected material?
Yes, a finish other than polished may be possible, but polished is the only finish listed for these White Limestone Wall Tiles. STOOANCE offers other stone finishes subject to material suitability; availability for the selected limestone and batch has not been confirmed. Tell STOOANCE which finish you want and whether the tiles are for an indoor wall or stair application. The team can review the material, sample, thickness, and drawings before confirming the finish for your order.
Are these wall tiles suitable for the planned stair-area application?
Yes, these white limestone tiles are listed for indoor and stair-area applications, so they may suit walls beside an interior staircase. That listing does not establish suitability for stair treads or wet areas. The specified finish is polished, with 18, 20, and 30 mm thicknesses and project-customized sizes. Before ordering, confirm the exact wall location, substrate and fixing method with the installer, then approve the actual material and batch. STOOANCE can review drawings and confirm dimensions, edges, and finish for fabrication.
How should natural color, pores and fissures be reviewed before production?
Review and approve the actual White Limestone Wall Tiles batch or representative samples before production. Check the acceptable range of white color, pores, veining, and natural fissures, including any areas that may need resin treatment. STOOANCE can support remote video selection, batch reservation, and photo or video records. Natural stone varies between pieces, so a small sample may not show the full range. Next, agree on the approved batch and appearance criteria alongside the drawings, polished finish, and tile layout before cutting.
Can STOOANCE arrange remote material selection for White Limestone Wall Tiles?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
White Limestone Wall Tiles: A Buyer’s Guide to Specification and Sourcing
Use this guide to assess where white limestone belongs, select finishes and dimensions, approve samples, and compare suppliers. It also identifies the specification and purchasing mistakes that can disrupt a wall tile project.
What Are White Limestone Wall Tiles?
White Limestone Wall Tiles are cut from natural limestone, a sedimentary carbonate stone used for interior wall finishes. The word white describes a commercial color range, not a promise of uniform tone; visible pores, fossils, fissures, and shade variation depend on the approved batch.
Marble is carbonate stone transformed by heat and pressure, while travertine is a distinct limestone variety commonly associated with layered deposits and voids. Limestone-look porcelain or other manufactured tiles reproduce an appearance but are not natural limestone.
STOOANCE lists this product as white limestone with project-customized sizing and a polished finish. The listed thickness options are 18, 20, and 30 mm; confirm the chosen batch and specification before fabrication.
Where Are White Limestone Wall Tiles Suitable?
White Limestone Wall Tiles are listed for indoor use, with project-customized sizing. Interior walls and feature walls are practical candidates, but the listing alone does not establish suitability for every exposure or installation.
| Application | Initial Assessment | Key Check |
|---|---|---|
| Interior feature wall | Candidate | Batch and layout |
| Wet wall | Review required | Water and maintenance |
| High-contact wall | Review required | Impact and cleaning |
| Exterior or stairs | Separate review | Fixing, exposure, code |
Interior Walls
Interior feature walls with limited contact are suitable candidates. Approve the actual stone batch because white limestone can show pores, fissures, and color variation.
Wet and High-Contact Areas
Wet walls need review for water exposure, possible staining, sealing, and maintenance. Limestone is sensitive to acids; high-contact areas also need a cleaning and impact-risk assessment.
Exterior Cladding and Stairs
Exterior cladding and stair applications require separate review. Substrate, fixing method, exposure, local code, and project-specific testing determine whether the selected stone and finish are appropriate.
White Limestone Wall Tiles: Formats and Finishes
White Limestone Wall Tiles are listed in project-customized sizes with a polished finish. Choose format and surface treatment around the wall layout, expected visual variation, and cleaning routine.
| Finish | Appearance | Cleaning consideration |
|---|---|---|
| Polished | Reflective; variation can stand out | Shows smears readily |
| Honed | Matte; softer contrast | Check pore exposure |
| Textured | Relief emphasizes surface character | Recesses need attention |
Tile Formats and Cut-to-Size Pieces
Repeated tile sizes suit regular grids and predictable joint patterns. Custom cut-to-size pieces help align corners, openings, and feature-wall layouts; agree the cutting schedule from drawings.
Polished, Honed, and Textured Surfaces
This product is listed with a polished finish. Honed or textured finishes may change how pores, fossils, and color shifts appear; confirm suitability and availability for the selected material and batch.
Coordinated Wall Components
Matching returns, surrounds, and skirting can carry the same stone across adjoining details. Review pieces together for color range and vein direction before fabrication.
Specify Dimensions, Thickness, Edges, and Layout
White Limestone Wall Tiles need a piece schedule drawn from approved elevations, not a nominal tile size alone. Resolve fabrication details with the installation team before cutting.
Translate Drawings Into Pieces
Elevations should identify each piece size, opening, joint, and exposed edge. Assign piece numbers that match the wall elevation and installation sequence.
Confirm Thickness And Fixings
18, 20, and 30 mm are the listed thickness options. Select one against the proposed piece sizes and fixing design.
Larger or heavier pieces require the local installer or engineer to verify the substrate, fixing method, and movement provisions.
Lock Layout And Tolerances
White limestone varies naturally, so mark vein direction and adjacent-piece relationships on the layout. Agree on edge profiles, opening positions, joint widths, dimensional tolerances, and cutting feasibility for the chosen stone and approved shop drawings before fabrication.
Approve Samples and the Actual Stone Batch
White Limestone Wall Tiles can vary across a production batch in shade, pores, and natural markings. Approval should move from the design reference to the material that will be fabricated.
Compare the Reference and Sample
A reference image establishes the intended look; a representative physical sample shows the stone and proposed polished finish more reliably.
A small sample captures only one part of a variable material, so it cannot define every tile’s appearance.
Review the Current Batch
Current slab or batch photos and video show the broader color and pore range before cutting. Agree in writing which variations are acceptable, including visible fissures or repairs where present.
STOOANCE can reserve an approved batch subject to current availability.
Sign Off Before Production
A finish sample and, where appropriate, a first fabricated piece confirm the intended appearance on actual stone. Record written approval against the selected batch and sample.
Aesthetic sign-off does not replace any performance testing required by the project specification.
Check Fabrication Quality Before Shipment
For White Limestone Wall Tiles, inspect fabricated pieces against the approved sample, shop drawings, and agreed tolerances before dispatch. Record any deviation while pieces can still be corrected or replaced.
Verify Cut Pieces
Check dimensions, thickness, flatness, edge profiles, and cutouts against each drawing reference. Confirm quantities by size and elevation, including spare pieces specified in the order.
Number custom pieces so the inspection record identifies exactly where each belongs.
Inspect Stone And Finish
Compare finish consistency and color range under consistent lighting. Identify natural fissures, filled pores, repairs, and resin treatment; judge their acceptability against the approved sample and agreed criteria.
Photograph any disputed area with its piece number visible.
Confirm Layout And Packing
Dry lay feature walls or directional layouts when alignment warrants it. Photograph the arrangement before packing, then check that numbered labels match the drawings.
STOOANCE can provide inspection images and packing records so buyers have a clear acceptance record before shipment.
How to Evaluate a Limestone Tile Supplier
White Limestone Wall Tiles should be compared against the actual batch and project drawings, not a catalog image. Ask each supplier to show how it controls fabrication, inspection, packing, and communication.
Traceability and Batch Access
Request the stone’s commercial name, source information, current batch photos, and a physical sample. STOOANCE can arrange remote video selection and batch reservation, subject to current availability and order confirmation.
Fabrication and Shipment Controls
Shop drawings should define sizes, thickness, edges, and piece numbering before cutting. Compare fabrication capability, inspection photos, documented defect decisions, crate labels, and packing plans by room or elevation.
Documentation and Communication
Destination rules and the intended application determine which test reports, declarations, and import documents to request. Verify each certificate’s holder, product scope, and validity before relying on it; confirm STOOANCE’s fabrication and reporting arrangements for the specific order.
Common White Limestone Wall Tiles Buying Mistakes
White limestone varies by batch, and a polished sample cannot settle every project decision. These six mistakes are easiest to prevent before cutting begins.
Approve the Actual Material
Edited photos can distort white tones. Request an unedited video and a physical sample from the proposed batch.
White limestones can differ in porosity and surface character. Confirm the selected stone suits the intended wall location and cleaning regime.
Lock the Fabrication Details
A finish name alone leaves visible edges unresolved. Approve the polished face, edge profile, and any returns on the drawings.
Incomplete elevations invite misplaced cuts. Issue final dimensions, openings, joint layout, and piece numbers before authorizing production.
Plan for Variation and Installation
A small sample may miss batch variation. Review the full color range and reserve an approved batch for connected walls.
Fixing and maintenance choices affect the finished surface. Have the local installer approve the substrate, fixing method, and care plan before ordering.
From Inquiry to Packed Project Delivery
STOOANCE begins a White Limestone Wall Tiles inquiry with the intended application and reference image. Send drawings, dimensions, thickness, finish, quantity, destination, and required schedule so the team can assess the order.
Confirm Material and Approvals
STOOANCE checks current material and batch availability before confirming a supply route. Approve the actual sample or batch and fabrication drawings, including edges and tile numbering, before production.
Inspect and Pack the Order
Production inspection checks dimensions, thickness, finish, color range, and piece numbers against the approved order. Review inspection photos or video, then approve labels and packing by room or elevation.
Protective crates or supports are selected for the pieces and shipping method.
Agree Shipping and Site Handoff
STOOANCE can discuss EXW, FOB, CIF, or DDP terms after reviewing the destination and order. Confirm the production schedule and delivery arrangements for the selected batch.
Qualified local contractors normally install overseas projects; provide them with the numbered packing records and approved drawings.
What Determines White Limestone Wall Tiles Cost?
STOOANCE quotes White Limestone Wall Tiles against the approved batch, drawings, finish, packing, and destination. Request itemized quotations on identical specifications, with cutting waste and replacement pieces shown separately.
| Cost factor | Qualitative impact | Quote input |
|---|---|---|
| Material and batch | Selection and visual matching affect usable yield. | Approved sample, batch, color range |
| Size and thickness | Larger formats and thicker stone can increase material use and handling. | Tile schedule; 18, 20, or 30 mm |
| Finish and fabrication | Polishing, edge work, and complex cuts add processing. | Finish, edge details, cutouts |
| Order quantity | Volume affects setup and material allocation. | Tile counts and spare-piece allowance |
| Inspection and packing | Dry lay, documentation, and protective packing add work. | Inspection scope and packing method |
| Freight and Incoterm | Delivery scope and destination change landed cost. | Destination and requested Incoterm |