Laminated Bullnose Dark Green Marble Countertops
Bring natural green marble to indoor kitchens, worktops, and front counter desks with a polished surface and a laminated bullnose edge. STOOANCE fabricates countertops against approved material and drawings, so the color range, veining, edge details, and cutouts can be reviewed before production.
Listed options include 96, 98, and 108 inches by 25 inches, with 18 mm or 20 mm thickness. Confirm the selected batch, final dimensions, and current availability when requesting a quote.
- Natural green marble with expected color and veining variation
- Polished finish and laminated bullnose edge
- Listed lengths of 96, 98, or 108 inches at 25 inches wide
- Remote slab selection and inspection photos or video available according to the order
Dark Green Marble Appearance and Variation
Dark green marble brings a rich, natural color to a countertop. Its appearance depends on the actual stone selected: shade, veining, and the balance of darker and lighter areas can change from one slab or batch to another. A small sample is useful for judging color, but it cannot show the full pattern of a finished piece.
Review images or video of the available material before approving an order, especially when several countertops will be seen together. For adjoining pieces, identify which color range and vein direction you want so the selected material can be assessed against the layout.
Natural fissures, pores, and any resin treatment should also be reviewed on the chosen material. These characteristics vary by piece; agree on the acceptable appearance using the actual batch before production.
Request a Quote
Listed Sizes, Finish and Indoor Uses
STOOANCE lists this dark green marble product for indoor countertops, kitchen worktops, and front counter desks. The following dimensions are source-listed options, not a guarantee that every size is available in the current batch.
- Listed sizes: 96, 98, or 108 inches long by 25 inches wide, with other dimensions to be reviewed from drawings.
- Listed material thicknesses: 18 mm and 20 mm.
- Listed surface finish: polished.
For a kitchen or reception counter, confirm the finished dimensions, cutouts, support conditions, and intended use before fabrication. Marble can be sensitive to acids, staining, and wear, so the buyer should agree on suitable care and any treatment requirements for the installation.
Send STOOANCE the layout or shop drawings and identify the required thickness, quantity, and finish. The team can then check the selected material and production requirements against the order before quoting.
Request a Quote
Laminated Bullnose Edge and Custom Fabrication
A laminated bullnose edge combines a built-up front detail with a rounded profile. The laminated section gives the countertop a deeper-looking edge, while the bullnose softens the exposed front. The visible edge height, curve, and placement of the lamination joint should be shown on an approved detail drawing; the listed slab thickness alone does not define the finished edge height.
For drawing-based fabrication, send the finished countertop dimensions, edge locations, overhangs, corner shapes, and any sink, faucet, or appliance cutouts. Mark where exposed ends need the same edge treatment and where pieces meet at seams. STOOANCE can review the drawings against the selected marble and confirm the fabrication details before cutting.
For a multi-piece run, agree on edge alignment and vein direction alongside the joint layout. Final measurements and support requirements should be checked for the installation site with the local fabricator or contractor before production approval.
Request a Quote
Batch Coordination, Inspection and Packing
For orders with multiple countertops, STOOANCE coordinates material selection by approved sample or actual batch. Buyers can review slabs remotely by video and reserve a batch before production, subject to current availability. Agree on the acceptable color and vein range before cutting so pieces intended for the same space can be reviewed together.
- Before fabrication: confirm the selected material, piece schedule, drawings, quantities, and labeling plan.
- During production: check dimensions, thickness, flatness, polished finish, bullnose edge quality, and any natural fissures or resin treatment against the approved requirements.
- Before packing: verify piece numbers and quantities, then review inspection photos or video where included in the order.
- For shipment: specify packing and labels by room, drawing, or installation sequence; suitable protective packing is selected for the pieces and shipping route.
Send the destination and unloading requirements with the order details so the packing plan can be agreed before dispatch. STOOANCE can provide numbering, labels, and photographic packing records according to the order, helping the receiving fabricator or local installer identify each piece.
Request a QuoteTechnical Specifications
Product Information
- Product
- Laminated Bullnose Dark Green Marble Countertops
- Material / Category
- Marble
- Material
- Marble
- Color
- Green
- Size
- 96''/ 98''/ 108'' x 25'', etc
- Thickness
- 18mm, 20mm
- Finish
- Polished
- Location
- Indoor, Kitchen
- Countertops Type
- Countertops, Front Counter Desks, Worktops
- Edge Type
- Bullnose, Laminated
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
Laminated Bullnose Dark Green Marble Countertops FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteWhat countertop sizes are listed, and can STOOANCE fabricate to project drawings?
The listed countertop sizes are 96 × 25, 98 × 25, and 108 × 25 inches, with other sizes indicated but not specified. Yes, STOOANCE offers drawing-based countertop fabrication. For a project order, send the drawings, required dimensions, cutouts, edge profile, thickness, finish, and quantity. STOOANCE will confirm the selected marble batch, fabrication details, and current availability before production. The listed sizes do not establish what is in stock or what dimensions are feasible for a particular slab.
How should I choose between the listed 18 mm and 20 mm thicknesses?
Choose 18 mm or 20 mm based on the approved drawings, countertop support, cutouts, and desired edge profile. Both are listed options for this polished dark green marble countertop, but a laminated bullnose edge can look thicker than the underlying stone, so confirm the actual slab thickness. Neither option can be recommended for your installation without reviewing its dimensions and support. Send STOOANCE your drawings, cutout locations, and edge details to confirm the suitable thickness and fabrication plan.
What laminated bullnose edge details should be confirmed before production?
Before production, confirm the bullnose profile and radius, which edges receive it, the laminated edge’s finished thickness and build-up, corner transitions, and acceptable seam visibility. Mark these details on the approved drawings, including cutouts and any exposed ends. The listed marble thicknesses are 18 mm and 20 mm, but they do not establish the finished laminated edge thickness. STOOANCE reviews edge details against the selected material, batch, and drawings. Approve an edge drawing or sample before fabrication.
Is a polished finish the only listed option for this product?
Yes. Polished is the only finish listed for this countertop. STOOANCE can fabricate other stone finishes, but their suitability for this dark green marble has not been confirmed. If you prefer a honed or other finish, share your intended use and drawings. STOOANCE can then check the selected material and batch, confirm whether that finish is feasible, and quote the approved specification.
What should buyers consider when specifying this marble for an indoor kitchen?
Specify the marble batch, 18 or 20 mm thickness, polished finish, and laminated bullnose edge for your kitchen layout. Source-listed sizes include 96, 98, or 108 × 25 inches; confirm final dimensions, cutouts, and edge details from drawings. Review actual slabs for color, veining, and natural fissures. Marble can etch when exposed to acids, so consider the kitchen’s use and care requirements. STOOANCE supports remote slab selection and inspection records. Send drawings and request current batch photos or video before approving production.
Can STOOANCE arrange remote material selection for Laminated Bullnose Dark Green Marble Countertops?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
Laminated Bullnose Dark Green Marble Countertops Buyer’s Guide
Use this guide to assess whether dark green marble suits your project, compare edge and finish specifications, evaluate supplier controls, and avoid costly mistakes in sample approval, fabrication, inspection, and shipping.
What Are Laminated Bullnose Dark Green Marble Countertops?
Laminated Bullnose Dark Green Marble Countertops are natural marble work surfaces with a rounded front edge. The bullnose profile softens the exposed edge, while a bonded stone strip builds up its visible depth; the finished edge can therefore look thicker than the main slab.
18 mm and 20 mm are the source-listed slab thicknesses, with a polished finish for indoor kitchens, worktops, and front counter desks. The laminated edge’s finished depth, radius, joint position, and treatment at corners and cutouts should be shown on approved fabrication drawings. Natural green tone, veining, and fissures vary by batch, so confirm the actual material and availability before production.
Types of Laminated Bullnose Dark Green Marble Countertops
The listed product is polished marble with a laminated bullnose edge, offered in 18 mm and 20 mm thicknesses. Each configuration needs its own layout and application review.
Kitchen Worktops
Kitchen worktops face spills and frequent cleaning. Confirm sink and appliance cutouts, seam locations, and exposed edges; expect prompt spill cleanup and marble-safe maintenance.
Front Counters
Front counters put the bullnose edge in public view. Specify edge returns, joint positions, and the surfaces visitors can touch; assess wear and cleaning routines.
Vanity Tops
Vanity tops may suit an approved batch and layout. Confirm basin and faucet cutouts, splash exposure, visible edges, and a cleaning routine appropriate for marble.
Drawing-Based Pieces
Custom pieces follow approved shop drawings. Mark cutouts, seam lines, vein direction, and edge profiles before fabrication; confirm material suitability and maintenance expectations for the intended location.
Is Dark Green Marble Suitable for Your Project?
STOOANCE lists Laminated Bullnose Dark Green Marble Countertops for indoor kitchens, but suitability depends on how the surface will be used and cleaned. Review the actual batch before specifying it.
| Setting | Main Exposure | Buying Decision |
|---|---|---|
| Kitchen | Acids and stains | Confirm care expectations |
| Commercial counter | Heavy traffic and frequent cleaning | Compare maintenance demands |
| Wet-area counter | Moisture at joints | Review detailing |
Daily Use And Cleaning
Kitchen worktops face acidic spills that can etch marble, even when spills are wiped promptly.
Agree on cleaning routines and acceptable surface changes with the end user before approval.
Traffic And Moisture
Busy commercial counters need a maintenance plan for spills, wear, and frequent cleaning.
Wet areas also require detailing that limits standing water and protects joints.
Material Identity And Variation
Dark green is a commercial color description, not a verified geological classification or performance rating.
Inspect the selected slabs for color range, veining, fissures, and any resin treatment; consider another stone if the buyer expects a uniform, low-maintenance surface.
Choosing the Finish, Edge, and Dimensions
The listed countertop has a polished finish and a laminated bullnose edge. Specify visible surfaces, edge geometry, and cutouts together so the approved drawings describe the finished piece.
Finish Selection
Polished is the source-listed finish for this dark green marble. Honed or textured alternatives require confirmation against the selected material; request a sample before approving a change.
Bullnose And Lamination Details
Bullnose radius and edge build-up affect the finished profile. Mark every exposed side on the drawings, and agree where the lamination joint may remain visible, especially at returns and corners.
Dimensions, Cutouts, And Seams
Listed sizes of 96, 98, and 108 inches by 25 inches are references. Approved drawings must set final dimensions, sink and appliance cutouts, and seam placement against the selected slabs and cabinet layout.
Construction Quality in Laminated Bullnose Dark Green Marble Countertops
Construction quality depends on both the selected marble and the finished fabrication. Inspect the actual slab and completed countertop against approved samples and shop drawings, with tolerances agreed before production.
Slab Soundness and Natural Features
Natural fissures and veining can be acceptable when they match the approved sample and remain sound for the intended cut. Record any resin treatment; reject open cracks, loose areas, or repairs outside the agreed acceptance criteria.
Laminated Edge Construction
A laminated bullnose needs a specified backing or substrate and joint position in the shop drawing. Check bond lines, alignment, uniform profile radius, and continuous polish across the face and return.
Surface and Cutout Workmanship
The finished top should meet the approved thickness and flatness tolerances. Inspect sink and fixture cutouts for correct placement, smooth edges, supported corners, and chips or cracks introduced during fabrication.
Approving Samples, Slabs, and Shop Drawings
Approve Laminated Bullnose Dark Green Marble Countertops in sequence: sample, actual slab or batch, layout, then shop drawings. Record each approval before cutting begins.
Review the Physical Sample
A physical sample establishes the intended green tone, polish, and visible stone character. Its small area cannot show the full slab’s veining, fissures, or natural color range.
Inspect Slabs and Set Layout
The actual slab or batch determines which tones and veins will appear across the finished tops. STOOANCE can support remote video selection, then record the approved pieces, layout, and vein direction.
Sign Off Shop Drawings
Shop drawings should identify each top’s dimensions, cutouts, seams, polished finish, and laminated bullnose edge details. Confirm the drawings against the selected slabs and agreed layout before fabrication.
How to Evaluate a Marble Countertop Manufacturer
For Laminated Bullnose Dark Green Marble Countertops, assess the actual batch and the factory’s ability to reproduce the approved edge. Request evidence tied to your drawings and order.
Verify Batch Access
Request full-slab photos or video of the proposed batch. Review color, veining, fissures, and resin treatment, then confirm availability and reservation before production.
Check Fabrication and Drawing Control
STOOANCE operates stone fabrication and countertop factories in Shuitou. Request a profile sample or drawing showing the laminated seam and bullnose radius.
Approved shop drawings should define dimensions, cutouts, tolerances, and the order-specific production schedule.
Inspect and Protect the Finished Pieces
In-process and final records should cover dimensions, flatness, polish, seam appearance, edges, and numbering. Request dry-lay or layout photos where pieces must align.
Export packing should protect bullnose edges and identify each piece. Confirm which inspection and packing documents will accompany the order.
Common Buying Mistakes and How to Avoid Them
A countertop can meet a color brief yet disappoint after fabrication. Check the selected stone, edge construction, drawing details, and handling plan before approving production.
Swatches and Finish Assumptions
A small green swatch cannot show the full slab’s veining, fissures, or color range. Approve photos or video of the selected batch and mark the pieces to be cut.
The listed finish is polished. Request a sample of any alternative finish on the selected marble before specifying it.
Edge Depth and Drawing Omissions
An 18 mm or 20 mm slab can have a deeper-looking laminated bullnose edge. Confirm the slab thickness and the finished edge profile separately.
Cutouts and seams affect both fabrication and appearance. Approve their dimensions and locations on shop drawings.
Maintenance and Arrival Handling
Polished marble needs a care plan suited to its use. Agree on cleaning, spill response, and any sealing advice for the selected stone.
Countertop edges are vulnerable during unloading and movement. Confirm packing protection and have the receiving team inspect and photograph each piece before installation.
From Quotation to Delivery and Installation
STOOANCE starts a countertop order with an RFQ covering drawings, quantities, destination, polished finish, bullnose edge, and packing requirements. The quote reflects the specified material and fabrication scope.
Confirm the Batch and Drawings
STOOANCE checks current slab availability and supports remote video selection before batch approval.
Approved shop drawings establish dimensions, cutouts, edge details, and piece identification for production.
Inspect and Pack the Pieces
STOOANCE can provide production and final inspection photos or video covering finish, edges, dimensions, and numbering.
Protective packing and labels tied to drawings help the receiving team identify pieces and reduce handling damage.
Ship and Coordinate Local Installation
STOOANCE coordinates shipment after inspection and packing; qualified local contractors normally install overseas orders.
Payment terms, minimum order quantity, lead time, and logistics depend on the confirmed material, drawings, quantity, destination, and schedule.
Pricing Laminated Bullnose Dark Green Marble Countertops
STOOANCE prepares quotations against an approved material batch and fabrication drawings. For comparable bids, request separate lines for stone, fabrication, inspection, packing, and freight, with the same scope and delivery term.
18 mm and 20 mm are the listed thickness options. Specify the required size, edge profile, cutouts, and polished finish; ask each supplier to state its slab yield assumptions and any exclusions.
| Cost component | What changes it | Buyer should confirm |
|---|---|---|
| Selected batch | Color and availability | Approved slab reference |
| Slab yield | Veining and usable area | Layout and waste allowance |
| Dimensions | Piece sizes and thickness | Final drawings |
| Edge lamination | Build-up and bullnose profile | Edge detail |
| Cutouts | Number and shape | Sink and fixture templates |
| Finish | Polishing scope | Surface and edge finish |
| Inspection | Records required | Photo or video scope |
| Packing | Protection and crate type | Packing specification |
| Freight | Route and Incoterm | Named destination and included charges |