White Marble Tiles
STOOANCE supplies polished white marble tiles for indoor floors and wall cladding. The listed thickness is 18 mm, with tile dimensions customized to project drawings. Because marble varies naturally, review the actual sample or batch for color, veining, fissures, and any resin treatment before production.
For coordinated projects, STOOANCE can support remote slab selection, vein direction planning, piece numbering, and inspection records. Share your drawings, quantities, and destination so the team can confirm the material, fabrication details, availability, and delivery plan.
- Natural white marble with a polished finish
- Listed thickness: 18 mm; project customized sizes
- Intended applications: indoor floors and wall cladding
- Batch review and photo or video inspection available according to the order
White Marble Appearance and Natural Variation
STOOANCE White Marble Tiles are natural marble in a white color range. The exact shade and markings depend on the material and batch selected. Veining, contrast, pores, and natural fissures can vary from piece to piece; any resin treatment should be reviewed on the actual stone.
A small sample helps establish the general appearance, but it may not show the full range of tiles needed for a larger area. For adjoining surfaces, review representative pieces from the proposed batch and agree on an acceptable range of color and veining. Lighting can also change how the stone appears, so assess samples under conditions close to the intended space where practical.
If the design calls for a quiet, even look or a more varied pattern, share that preference before material selection. STOOANCE can provide photos or video for remote review and help plan the distribution of visible variation across the order. The final appearance should be judged against the approved material and batch, with natural differences expected.
Request a Quote
18mm Polished Tiles for Indoor Floors and Walls
STOOANCE lists these white marble tiles at 18 mm thick with a polished finish for indoor floors and wall cladding. The polished surface gives the stone a reflective appearance. Suitability for a specific floor or wall should be reviewed against the project’s use, substrate, and installation design.
For floors, tell STOOANCE whether the area is dry or regularly exposed to water, and describe expected foot traffic. Polished marble can be slippery when wet, so the project team should confirm the required slip resistance and applicable local rules before specifying it for entrances, bathrooms, or other wet areas. The 18 mm thickness alone does not establish suitability for every floor assembly.
For walls, the local designer and installer should confirm the fixing method and supporting structure for the tile format and location. Marble also needs a care plan suited to its use: acidic cleaners can etch a polished surface. STOOANCE supplies and fabricates the stone; overseas installation is normally handled by qualified local contractors.
Request a Quote
Custom Tile Sizes and Coordinated Layouts
STOOANCE supplies White Marble Tiles in project-customized sizes. The cutting plan is developed from approved drawings and the selected material, so dimensions, thickness, finish, edges, and any cutouts should be settled before fabrication.
For a floor or wall package, provide the information that connects each tile to its intended position:
- Dimensioned plans or elevations showing tile sizes and quantities
- A layout drawing showing joint locations, borders, and changes in direction
- The required vein direction and any areas where adjacent pieces should be visually coordinated
- Details for corners, openings, edge finishes, and shaped cuts
STOOANCE can coordinate cutting, dry lay, and piece numbering against the approved layout. Shaped pieces can be reviewed from drawings where the material and fabrication method allow. The final cut schedule should account for the actual selected batch and be agreed with the local installer, who normally handles overseas installation.
Request a Quote
Batch Approval and Pre-Shipment Inspection
Before production, STOOANCE asks buyers to approve the actual white marble material, sample or selected batch. Remote video selection can help review the stone when an in-person visit is impractical. Because marble varies naturally, the approved material and agreed color and vein range become the reference for the order.
For custom-sized tiles, the team reviews drawings and confirms dimensions, the specified 18 mm thickness, polished finish, edge details and any required vein direction before cutting. Project tolerances and the inspection plan should be agreed for the selected material and intended indoor floor or wall application.
- Compare finished pieces with the approved sample or batch for color and veining.
- Check dimensions, thickness, flatness, edge quality and polish against the approved order requirements.
- Review natural fissures and any resin treatment on the selected material.
- Verify quantities, piece numbers and labels against the drawings or tile schedule.
Inspection photos or video and numbering records can be provided according to the order. Buyers should confirm any acceptance criteria that matter to their layout before production, so the pre-shipment review has a clear reference.
Request a Quote
Packing and Delivery for Project Sites
For White Marble Tiles, packing should reflect how the project team will receive and use the material. STOOANCE can group cut pieces by room, elevation, drawing reference, or installation sequence, with labels and piece numbering agreed during order planning. This helps the receiving team identify the right material for each area without relying on appearance alone, since natural marble varies from piece to piece.
Packing options include fumigated wooden crates or plywood cases, with waterproof protection, foam, and corner protection selected to suit the order. Confirm crate grouping and any site handling requirements before production, particularly when several tile sizes or areas share one shipment. STOOANCE can provide packing records according to the agreed order requirements.
For delivery planning, provide the destination, required receiving sequence, site access constraints, and target schedule with the drawings and quantities. STOOANCE can review the packing plan, shipment route, and suitable trade terms for the order; timing and terms depend on the production schedule and destination. Overseas installation is normally completed by qualified local contractors, so the piece references and delivery sequence should also be coordinated with the installer.
Request a QuoteTechnical Specifications
Product Information
- Product
- White Marble Tiles
- Material / Category
- Marble
- Color
- White
- Size
- Project Customized Size
- Thickness
- 18mm
- Finish
- Polished
- Location
- Floor, Indoor, Wall Cladding
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
White Marble Tiles FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteIs the specified 18mm thickness suitable for my floor or wall design?
The specified 18 mm polished white marble tile may suit an indoor floor or wall, but thickness alone cannot confirm suitability for your design. Floor loading, substrate, fixing method, tile dimensions and local requirements need review; for floors, confirm whether the polished finish meets the required slip resistance. STOOANCE can review your drawings, application, dimensions and selected material before production. Share the floor or wall details and expected use so the final thickness and installation specification can be confirmed with your designer and installer.
Is a polished finish suitable for the intended traffic and slip conditions?
A polished finish may suit indoor walls and some floors, but its suitability for the intended traffic and slip conditions cannot be confirmed from the product details alone. These White Marble Tiles are listed with a polished finish and an 18 mm thickness for indoor floors and wall cladding. Polished marble can be slippery when wet, so confirm the location, expected traffic, exposure to water, and any applicable slip-resistance requirements. STOOANCE can review the selected material and finish against the application before production; request a sample and relevant test documentation if the project requires them.
How much colour and veining variation should I expect between tiles?
Expect visible differences in color and veining between tiles. Natural white marble varies, and the product listing does not establish a fixed shade range or matching tolerance. STOOANCE can support remote material selection and check the proposed batch’s color range and vein direction. Before production, review photos or video of the actual material, approve the batch or sample, and specify whether your layout needs a consistent look or allows stronger variation.
Can tile dimensions and the layout be made to project drawings?
Yes. STOOANCE can cut White Marble Tiles to project drawings and support dry lay, vein-direction control, piece numbering, and labeled packing for the planned layout. The listed product is 18 mm thick with a polished finish. Final tile dimensions, edges, quantities, and layout depend on the approved drawings and selected marble batch. Send dimensioned plans, a tile schedule, and any pattern or vein-direction requirements so STOOANCE can confirm feasibility before production.
How are tiles from an approved batch matched across a large area?
STOOANCE matches tiles from an approved batch by reviewing their color and veining, planning the layout, controlling vein direction, and numbering pieces for installation. For large areas, the team can dry lay the tiles and provide photos or video, then pack them with labels tied to the agreed layout. Natural variation and fissures remain visible within a batch. Before cutting and packing, approve the actual material, acceptable color and vein range, and layout drawings with your installer.
Can STOOANCE arrange remote material selection for White Marble Tiles?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
White Marble Tiles: A Buyer’s Guide to Selection and Sourcing
Choose white marble tiles with a practical framework for application, finish, specifications, sample approval, and landed cost. Learn what to verify with a supplier and which purchasing mistakes can disrupt a project.
What Are White Marble Tiles?
White Marble Tiles are individual pieces cut from natural white marble for installation with joints. Unlike large slabs, tiles divide a surface into repeatable units; unlike marble-look porcelain or engineered products, their color and veining come from the stone itself.
Natural white marble varies from piece to piece in background tone, vein pattern, pores, and fissures, including areas that may receive resin treatment. The buyer’s first decision is whether that variation suits the intended space and whether the owner can accept marble’s care needs, including prompt spill cleanup and protection from acidic substances that can etch the surface.
Types of White Marble Tiles
White Marble Tiles vary by named material, vein character, and how pieces are selected and cut. Commercial names alone establish neither geological classification nor origin; confirm the actual material and batch before specification.
Carrara White
Carrara White often shows soft gray veining.
Approve the selected batch against the intended visual range.
Calacatta White
Calacatta White typically presents bolder, more widely spaced veins.
Review full tiles because small samples can miss the overall pattern.
Quiet or Dramatic Veining
Fine veining gives large floors a calmer appearance.
Stronger veins demand deliberate orientation across adjacent tiles.
Tiles From a Coordinated Batch
One reserved batch helps control color and vein range.
Request batch images before approving production.
Standard or Drawing-Based Pieces
Regular tiles suit repeating layouts.
Drawing-based pieces accommodate borders, corners, and room-specific patterns.
Where Are White Marble Tiles Suitable?
STOOANCE lists White Marble Tiles for indoor floors and wall cladding, with an 18 mm polished specification. Suitability still depends on traffic, moisture, substrate, and maintenance.
| Setting | Key concern | Buyer action |
|---|---|---|
| Indoor floor | Wear and slip | Review traffic and cleaning |
| Interior wall | Moisture and support | Check substrate and fixing |
| Wet or busy area | Slip and staining | Validate site conditions |
| Exterior | Weather exposure | Request separate assessment |
Indoor Floors
Polished marble can scratch, stain, and etch when exposed to grit or acidic cleaners. Assess slip resistance for the actual floor conditions.
Interior Wall Cladding
Wall cladding avoids foot traffic but still needs a sound substrate and suitable fixing method. Check exposure to splashes and cleaning chemicals.
Demanding Locations
Wet areas, busy floors, and exterior locations need separate review of slip risk, drainage, weather exposure, and installation details. Plan routine cleaning and stain protection around actual use.
Choosing a Finish for White Marble Tiles
STOOANCE lists these White Marble Tiles with a polished finish. Other finishes require review of the selected marble and production process before approval.
| Finish | Appearance | Maintenance and application |
|---|---|---|
| Polished | Glossy; vivid veining | Etching shows; indoor walls and floors |
| Honed | Matte; softer veining | Etching less conspicuous; indoor floors |
| Brushed | Soft surface relief | Clean recesses; feature walls |
| Leathered | Tactile; low sheen | Check cleaning access; feature walls |
| Textured | Pronounced relief | Check soil retention and floor traction |
Floor Traction
Floor traction varies with finish and moisture.
Check project requirements against an approved sample.
Finish Consistency
An approved sample establishes acceptable sheen and texture.
Inspect production tiles against that benchmark.
Production Review
Brushed, leathered, and textured options depend on material suitability.
Confirm feasibility before specifying them.
Dimensions, Thickness, and Drawings
STOOANCE lists these White Marble Tiles at 18 mm thickness and project-customized size. Confirm both against the application, substrate, and approved shop drawings before fabrication.
Dimensions and Setting Plan
Approved drawings should state tile dimensions, layout, and joint widths.
Substrate flatness and movement joints require agreement with the local installer before finalizing the setting plan.
Edges and Vein Direction
Dimensioned drawings should locate edge profiles, openings, and cutouts.
Vein direction and piece numbers should follow an approved elevation or dry lay, especially across adjoining surfaces.
Tolerances and Quantity
Order-specific tolerances should cover length, width, thickness, flatness, and squareness.
Quantity takeoff should separate full tiles, cuts, spares, and agreed breakage allowances by room or elevation.
How to Approve White Marble Tile Samples
White Marble Tiles should be approved against the material intended for production. Request a physical sample first, then use current batch images to set the visual acceptance range.
Request a Physical Sample
A small sample shows surface color, veining, and polish at close range.
Natural marble varies across a slab, so one sample cannot represent every finished tile.
Review the Actual Batch
Full slab or tile photos and video reveal variation a hand sample misses.
STOOANCE can support remote selection; agree the acceptable white tone and vein range, then identify and reserve the selected batch before production.
Record the Approved Standard
The approval record should retain dated reference images and the batch identifier.
Confirm the polished finish, specified 18 mm thickness, and any visible resin treatment against the approved material before cutting.
Fabrication and Quality Checks Before Shipment
STOOANCE cuts White Marble Tiles to approved drawings and checks each order before shipment. Agree on acceptance criteria for the selected batch, finish, and intended application before production.
Cutting and Edge Work
Approved drawings govern tile dimensions, edge details, and vein direction. Confirm the cutting schedule before fabrication.
A dry lay can verify adjoining pieces and layout sequence when the design requires it.
Surface and Dimensional Checks
Pre-shipment inspection should cover dimensions, thickness, flatness, finish consistency, and chipped edges.
Natural veining and fissures are assessed against the approved batch and acceptance criteria. Record unacceptable damage or resin treatment outside those criteria separately.
Inspection and Packing Records
Quantity and piece numbers should match the drawings and packing list. Check that labels identify the intended room or installation sequence.
Request overall and close-up photos, inspection measurements, packing photos, and video of any dry lay.
How to Evaluate a White Marble Tile Supplier
White Marble Tiles should be compared against an identified production batch, approved sample, and project drawings. Ask each supplier how it records decisions and handles discrepancies before fabrication.
Batch Access and Approval
STOOANCE supports stock checks, remote video selection, and batch reservation. Request images of the proposed batch, then confirm current availability and approve its color and veining range before production.
Fabrication and Inspection
STOOANCE operates specialized slab and fabrication factories and can produce tiles from approved drawings. Compare suppliers’ inspection records for dimensions, thickness, flatness, finish, edges, and numbering; agree on tolerances and document scope for the order.
Communication and Packing Plan
STOOANCE can provide photos, videos, labels, and packing records matched to the order. Establish a contact for drawing revisions and inspection decisions, and confirm the production schedule and crate labeling plan before committing.
Packing, Shipping, and Delivery Terms
STOOANCE can pack White Marble Tiles in protected crates, with corner protection and waterproof covering suited to the order. Agree on the packing plan before shipment so crews can identify and handle each piece.
| Term | Seller Covers | Buyer Checks |
|---|---|---|
| EXW | Factory availability | Pickup onward |
| FOB | Loading aboard vessel | Ocean freight onward |
| CIF | Freight and insurance | Import and unloading |
| DDP | Named-place delivery and duties | Unloading arrangement |
Protect and Identify Each Crate
Labels can identify the room, drawing, or installation sequence. Match piece numbers to the packing list to reduce sorting errors on site.
Compare Delivery Terms
Request quotations on the same named destination and Incoterms basis. EXW, FOB, CIF, and DDP availability depends on destination and order review.
Confirm Each Handoff
Importers should confirm shipment documents, local duties, unloading equipment, and who bears risk at each handoff. Record these responsibilities in the purchase terms.
Common White Marble Tile Buying Mistakes
White Marble Tiles can vary between slabs and batches, even under one commercial name. Approval records should identify the material that will be cut.
Catalog Images And Mixed Batches
Catalog images do not establish the actual color or veining. Approve a selected batch by sample and slab photos or video.
Mixed batches require a written acceptable color and vein range before cutting.
Incomplete Drawings And Unsuitable Finishes
Shop drawings should show vein direction and exposed edge details. Approve a numbered dry lay where alignment matters.
Polished tiles need review against intended use and local slip requirements before finish approval.
Packing And Installation Gaps
Packing lists should link piece numbers to rooms or elevations and specify corner protection.
Local installers should approve the substrate, setting method, and joint layout against the drawings before shipment.
How Are White Marble Tiles Priced?
STOOANCE quotes White Marble Tiles against the approved material, batch, and drawings. The listed 18 mm polished specification is a reference; final project sizes require confirmation.
EXW, FOB, CIF, and DDP assign different delivery obligations. Name the destination and requested Incoterm to define the quoted scope.
| Quotation factor | Buyer provides | How it affects the quote |
|---|---|---|
| Material and batch | Approved sample or batch | Sets material selection and availability |
| Dimensions and thickness | Tile schedule and thickness | Determines cutting and material requirements |
| Finish | Specified surface finish | Defines finishing operations |
| Fabrication complexity | Drawings, edges, cutouts | Defines processing scope |
| Quantity | Required tile count or area | Sets production volume |
| Packing | Crate and labeling requirements | Adds protection and handling scope |
| Destination | Delivery address or port | Determines freight scope |
| Incoterm | Requested trade term | Assigns delivery costs and responsibilities |