London Gold Marble Tiles
London Gold Marble Tiles are natural marble in a gold and yellow color range, specified for indoor and stair applications. The product is listed with a polished finish, project-customized sizes, and 18 mm, 20 mm, or 30 mm thickness options.
For a consistent project layout, STOOANCE can support remote material selection, batch review, vein-direction planning, and piece numbering. Approve the actual material and drawings before production, since natural color, veining, fissures, and batch variation need to be assessed on the selected stone.
- Natural marble in a gold and yellow color range
- Polished finish; 18 mm, 20 mm, or 30 mm listed thicknesses
- Project-customized sizes for indoor and stair applications
- Remote selection and batch review available
- Drawing-based fabrication and numbered packing available
London Gold Marble: Color and Character
London Gold Marble Tiles are identified by their gold and yellow color. These tones can bring warmth to an interior scheme, but the product name does not define one uniform shade or vein pattern. The appearance of the actual stone should guide decisions about adjacent materials, grout color, and lighting.
As a natural marble, it may show differences in color, veining, pores, and fissures from piece to piece. Those features can also vary across batches. A small sample helps establish the general character, while images of the selected material give a clearer view of the range that may appear across a larger tiled area.
For a design that depends on a consistent visual rhythm, decide how much tonal and vein variation is acceptable before the tiles are cut. Where tiles will sit side by side, consider their orientation and distribution across the whole surface. Natural variation remains part of the finished appearance; the goal is to select and arrange material that suits the intended design.
Request a Quote
Custom Sizes, Thicknesses and Polished Finish
STOOANCE lists London Gold Marble Tiles in project-customized sizes, with 18 mm, 20 mm, and 30 mm thickness options and a polished finish. The finished tile format should be agreed for the specific order; the product listing does not establish a standard length and width.
- Dimensions: Provide the required finished length and width, measurement units, and quantity for each tile size. Confirm whether the dimensions on your schedule are nominal or finished sizes.
- Thickness: Specify which listed option you need. Have the project designer or installer confirm that it suits the substrate and installation method before ordering.
- Finish: Use an approved sample or selected batch to agree on the polished appearance, especially when tiles will be supplied across a larger area.
A polished surface brings out the stone’s color and veining, but it does not make marble resistant to acid etching or eliminate the need for suitable care. When requesting a quote, identify the intended tile sizes and thickness so STOOANCE can check the selected material and confirm what can be supplied.
Request a Quote
Indoor Floors and Stair Design
London Gold Marble Tiles are listed for indoor and stair applications. Their gold and yellow coloring can bring warmth to an entrance, corridor, or staircase. For a connected design, plan how the floor pattern meets the first step and where joints will fall across landings and changes in direction.
The listed finish is polished. Before specifying it for a stair or frequently wet area, have the project designer and qualified local installer assess slip resistance, expected foot traffic, maintenance, and applicable local requirements. If a different surface treatment is needed, ask STOOANCE to confirm whether it is suitable and available for the selected material.
For stairs, identify tread and riser locations, landings, exposed edges, and any nosing or safety-strip requirements in the project documents. Confirm the substrate and installation method with the local contractor. Natural marble may need a maintenance plan suited to the space; cleaning products and sealing decisions should be checked against the approved stone and finish.
Request a Quote
Cut to Your Project Drawings
STOOANCE can fabricate London Gold Marble Tiles to project drawings. A coordinated cutting schedule helps turn a layout into pieces that fit the intended space. Before production, share the drawings and identify any areas where joint positions or vein direction matter to the design.
- Provide plan and elevation drawings with dimensions, quantities, and a clear unit of measurement.
- Mark openings, corners, returns, and any pieces that need special shapes or cutouts.
- Specify exposed edges and the required edge profile for each relevant piece.
- Show the proposed joint layout and indicate where vein direction should follow the design.
STOOANCE reviews these details to determine a suitable cutting and shaping route, which may include bridge cutting, waterjet cutting, or CNC work where the geometry calls for it. Final dimensions, edge details, and fabrication feasibility are confirmed against the selected material and approved drawings before cutting begins.
Request a Quote
Batch Approval, Inspection and Piece Numbering
Before production, approve the actual London Gold Marble Tiles material or a representative sample from the selected batch. Review the acceptable gold and yellow color range, veining, natural fissures, and any resin treatment on that material. Natural stone varies from piece to piece, so a product image alone cannot define the appearance of a full order. STOOANCE can support remote slab selection by video and confirm whether the approved batch can be reserved.
STOOANCE reviews the approved material alongside the drawings and order requirements before cutting. During production and before shipment, its quality checks cover dimensions, thickness, flatness, polished finish, edges, quantities, and consistency with the agreed color range. The inspection plan should reflect the intended location and any project-specific acceptance criteria; tolerances are confirmed against the drawings and selected material.
For layouts with multiple cut pieces, STOOANCE can control vein direction, carry out a dry lay, and number pieces to match the drawings or installation sequence. Labels and packing records help the receiving team identify each piece. Inspection photos or video can be included according to the order, giving buyers a record to review before shipment.
Request a QuoteTechnical Specifications
Product Information
- Product
- London Gold Marble Tiles
- Material / Category
- Marble
- Material
- Marble
- Size
- Project Customized Size
- Thickness
- 18mm, 20mm, 30mm
- Finish
- Polished
- Location
- Indoor, Stair
- Color
- Gold / Yellow
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
London Gold Marble Tiles FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteWhat sizes can London Gold Marble Tiles be cut to?
London Gold Marble Tiles can be cut to project-customized sizes; no fixed length or width is specified. The listed thicknesses are 18 mm, 20 mm, and 30 mm, with a polished finish. STOOANCE offers drawing-based, cut-to-size fabrication. Send your required dimensions, quantities, layout, and intended indoor or stair application so the team can check the selected material and batch, confirm feasible piece sizes and tolerances, and prepare a quotation.
How should I choose between 18 mm, 20 mm and 30 mm thickness?
Choose 18 mm, 20 mm or 30 mm based on the tile size, substrate support, intended indoor or stair application, and the required edge detail. Thicker stone may suit designs needing a deeper visible edge, but thickness alone does not establish structural suitability or slip safety. All three thicknesses are listed for London Gold Marble Tiles; confirm the selected batch and available thickness before ordering. Send STOOANCE your drawings and application details so it can review fabrication requirements, then have the local installer confirm the installation specification.
Is the polished finish suitable for the intended indoor floor or stair?
Polished London Gold Marble Tiles may suit an indoor floor or stair, but the finish should be approved for the specific location before ordering. The product is listed for indoor and stair use, with 18, 20, and 30 mm thickness options; no slip-resistance rating is provided. Polished stone can be slippery when wet. Ask your local designer or contractor to check applicable slip requirements, then confirm the selected thickness and finish with STOOANCE using an approved sample or batch.
Can stair treads and risers be cut from the same approved batch?
Yes. STOOANCE can cut stair treads and risers from the same approved batch of London Gold Marble Tiles, subject to having enough suitable material available. This product is listed for indoor stair use, with project-customized sizes, 18 mm, 20 mm or 30 mm thickness, and a polished finish. Natural color and veining will still vary between pieces. Send the stair drawings, quantities, preferred thickness, edge details and vein direction so STOOANCE can check the batch and confirm the cutting plan before production.
How much color and veining variation should I expect between tiles?
Expect visible color and veining differences between London Gold Marble Tiles; the exact range depends on the selected batch and cannot be specified without viewing the actual material. The tiles are listed as gold/yellow marble with a polished finish, but a small sample may not show the full range. STOOANCE can support remote video selection and checks color range during quality control. Before production, review images or video of the available batch and approve the variation you can accept.
Can STOOANCE arrange remote material selection for London Gold Marble Tiles?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
London Gold Marble Tiles: A Buyer’s Guide
Use this guide to decide where London Gold marble is suitable, specify tiles and finishes, and approve the actual batch. It also covers supplier and inspection criteria, quote comparisons, and purchasing mistakes to avoid.
What Are London Gold Marble Tiles?
London Gold Marble Tiles are a gold to yellow marble product offered in project-customized sizes. The listed finish is polished, with thickness options of 18, 20, and 30 mm. Final dimensions and thickness should be confirmed against the selected material and project drawings.
London Gold is a commercial stone name; it does not establish a verified geological origin or promise a uniform look. Before ordering, review the actual material or approved sample alongside the proposed batch for colour range, vein direction, natural fissures, and any resin treatment. A small sample alone may not show how the tiles will look across a larger area.
Where Are London Gold Marble Tiles Suitable?
London Gold Marble Tiles are listed for indoor and stair use with a polished finish. Match the application to traffic, moisture, cleaning methods, and slip requirements.
| Application | Main exposure | Approval focus |
|---|---|---|
| Walls | Splashes, cleaners | Cleaning compatibility |
| Floors | Grit, moisture | Wear and slip |
| Stairs | Footwear, water | Slip and edges |
Indoor Walls
Walls have limited foot traffic, so batch appearance often drives selection. Check exposure to splashes and acidic cleaners in bathrooms or kitchens.
Indoor Floors
Floor traffic brings grit and wear that can change a polished surface. Wet footwear raises slip concerns; require project-specific testing and local code review.
Stairs and Demanding Areas
Stair approval must address slip resistance and edge details. Marble can etch from acids and stain after spills; decorative suitability alone does not establish technical approval.
London Gold Marble Tiles, Slabs, and Cut-to-Size Pieces
London Gold Marble Tiles are available in project-customized dimensions. Confirm the selected batch before fixing the format: its available slabs determine achievable sizes and visual matching.
| Form | Typical Use | Joints and Continuity | Fabrication and Handling |
|---|---|---|---|
| Tiles | Floors and walls | More joints; repeatable pattern | Cut to size; crate by area |
| Larger slabs | Broad wall areas | Fewer joints; stronger continuity | Plan layout and slab handling |
| Stair components | Treads and risers | Joints follow stair design | Detail edges; label each piece |
| Drawing-based pieces | Custom features | Continuity depends on layout | Cut to drawings; number pieces |
Choose the Supply Form
Tiles suit repeated floor or wall layouts. Larger slabs reduce joints but require careful handling and a layout plan.
Plan Stair and Custom Pieces
Stair components need drawing-based tread, riser, and edge details. Irregular pieces also require cutout and orientation instructions.
Control the Finished Layout
Specify matched layouts and vein direction before cutting where adjacent pieces must align. Request piece numbering for stairs, feature areas, and installation sequences.
Choosing a Finish for London Gold Marble Tiles
Polished is the source-listed finish for London Gold Marble Tiles; it emphasizes the gold and yellow color and veining. For floors and stairs, assess appearance alongside cleaning, wear visibility, and slip requirements.
| Finish | Appearance | Cleaning And Wear | Slip Review |
|---|---|---|---|
| Polished | Reflective | Marks more visible | Check wet-area suitability |
| Honed | Muted | Wear less conspicuous | Verify project requirement |
| Textured | Varies by treatment | Texture may trap dirt | Test specified application |
Polished Surface
Polished marble reflects light and makes veining more prominent. Footprints, water marks, and surface wear can become conspicuous; use stone-safe cleaning methods.
Honed Surface
Honed marble has a muted sheen that may make minor wear less obvious. Confirm this finish is available and appropriate for the selected batch.
Textured Surface
Textured finishes may change grip and cleaning effort. Confirm material suitability, finish availability, and required slip performance for each floor or stair location.
Dimensions, Thickness, and Drawing Requirements
London Gold Marble Tiles are listed in project customized sizes and 18, 20, or 30 mm thicknesses. Submit plans or shop drawings showing finished sizes and installation locations before production.
Finished Sizes and Joint Allowances
Finished dimensions should identify each piece by room or elevation. Show joint widths and perimeter allowances separately so fabrication sizes are not confused with overall installed dimensions.
Thickness for the Installation
The source lists 18, 20, and 30 mm options. Select thickness with the local installer after reviewing the substrate, unsupported spans, fixing method, and applicable standards.
Edges, Cutouts, and Vein Direction
Shop drawings should mark exposed edges, profiles, cutout positions, and required vein direction. For stairs, identify treads and risers individually; agree dimensional tolerances and the approved layout before cutting.
Samples, Batch Selection, and Approval
For London Gold Marble Tiles, approve the material in stages before fabrication. Start with a physical sample, then assess the actual batch and document what the project will accept.
Review the Physical Sample
A physical sample shows the polished surface and base color under project lighting. Its small area cannot represent every tile’s veining, tone, or natural fissures.
Inspect the Current Batch
STOOANCE can provide photos or video of current slabs or tiles for remote review. Confirm current stock and batch reservation before relying on any selection.
Record the Approved Range
The approved reference should specify acceptable gold tone, vein density, and visible variation. Record the selected batch and representative images before cutting begins.
Fabrication and Pre-Shipment Quality Checks
STOOANCE checks London Gold Marble Tiles against the approved material and shop drawings before release. Inspection criteria, including acceptable natural variation and fabrication tolerances, are agreed for each order.
Fabrication Checks
Approved drawings govern dimensions, thickness, flatness, and edge details. Inspect finished pieces for chips and verify quantities against the cutting list.
Approved material establishes the color range, finish consistency, natural fissures, and any resin treatment.
Coordinated Layouts
Vein direction matters where adjacent tiles form a continuous pattern.
A numbered dry lay with overview photos or video lets buyers review alignment before packing.
Packing Verification
Piece numbers and labels should match the drawings or installation sequence.
Before shipment, inspect protective packing, corner protection, crate contents, and labels against the agreed packing list.
How to Evaluate a Marble Tile Supplier
London Gold Marble Tiles are specified for indoor use, including stairs. Evaluate suppliers against the approved batch, drawings, inspection records, and shipment requirements before committing to an order.
Batch Access and Samples
An approved sample should be traceable to the selected batch. Ask for current availability, full-tile photos, and the acceptable color and vein range.
STOOANCE supports remote video selection and batch reservation, subject to confirmation.
Fabrication and Inspection
Approved drawings should govern tile dimensions, thickness, finish, edges, and piece numbering. Request inspection records covering fissures, resin treatment, flatness, finish, and packing.
STOOANCE can fabricate cut-to-size stone and provide order-specific photo or video records.
Packing and Change Control
A packing plan should identify crate contents and protect polished faces and edges. Require written notice before any batch, drawing, or finish change.
Confirm the production schedule, current supporting documents, and destination-specific shipping terms before payment.
Common Buying Mistakes and How to Avoid Them
London Gold Marble Tiles are offered in project-customized sizes and a polished finish. Buying errors often trace back to approvals that leave the batch, application, or installation details unclear.
Approve the Actual Batch
Catalog photos cannot define the delivered gold tone. Approve actual material images or a sample and reserve the selected batch.
Natural marble varies. Agree on an acceptable color and vein range before cutting.
Specify the Installation Area
A polished appearance alone does not establish suitability for stairs or wet floors. State the exact location and have the project team assess slip requirements.
Stair drawings should identify tread geometry, edges, and finish.
Close Drawing and Packing Gaps
Cut-to-size drawings should state dimensions, thickness, and agreed tolerances. Approve vein direction and piece numbers before fabrication.
Crate labels should match those numbers and the packing list. Check both against inspection photos before dispatch.
From Inquiry to Delivery
London Gold Marble Tiles are quoted against the intended application and actual order requirements. Send reference images, drawings, sizes, thickness, polished finish, quantity, destination, and required schedule with the inquiry.
Confirm Material and Order
STOOANCE checks current availability and arranges sample or batch review before production.
The quotation and approved drawings should identify the selected material, dimensions, edges, quantities, and packing requirements.
Produce and Inspect
Approved drawings and material selections guide tile fabrication and piece numbering.
Pre-shipment inspection checks color range, fissures, dimensions, thickness, finish, quantities, labels, and packing against the order.
Arrange Delivery and Installation
Shipping method, Incoterm, and required documents depend on the order and destination; confirm them before dispatch.
Overseas installation is normally completed by qualified local contractors.
Pricing and Total Purchase Cost
London Gold Marble Tiles are listed in 18, 20, and 30 mm thicknesses. Compare quotes using the same approved batch, tile schedule, finish, quantity, and Incoterm.
STOOANCE can confirm production and packing charges against the drawings. Confirm destination charges and local installation costs separately.
| Cost component | Quotation should specify | Confirm with |
|---|---|---|
| Material and yield | Selected batch, usable yield, waste allowance | STOOANCE |
| Tile specification | Dimensions, thickness, polished finish, quantity | STOOANCE |
| Fabrication and checks | Custom cuts, edges, inspection records | STOOANCE |
| Packing and freight | Crates, protection, Incoterm, shipping route | STOOANCE and forwarder |
| Destination costs | Duties, taxes, handling, local installation | Broker and contractor |