Kayrus Granite
Kayrus Granite is listed in brown and gray tones for bathroom, indoor floor, and kitchen applications. Its natural color and pattern can vary between slabs and batches, so review the actual material before approving a project.
STOOANCE supplies natural stone and provides drawing-based fabrication for project orders. Share your required dimensions, thickness, finish, quantity, and destination so the team can confirm the available batch, suitable fabrication route, and quotation.
- Listed thicknesses: 18 mm, 20 mm, and 30 mm; custom thickness requires confirmation.
- Listed finishes: brushed, bush hammered, flamed, honed, polished, and sandblasted, subject to material suitability.
- Remote slab selection and batch review are available.
- Inspection photos, piece labels, and packing records can be arranged according to the order.
Kayrus Granite Appearance and Natural Variation
Kayrus Granite is listed in brown and grey. Those color labels describe its general palette, but they cannot show the exact balance of tones in a particular slab. Review the actual material when choosing stone for a space where color matching matters.
As a natural stone, Kayrus Granite can vary across slabs and batches. Color, pattern, pores and natural fissures should be assessed on the selected material; photographs or a small sample may not represent the full surface. For an area using several pieces, compare them together to judge how much variation is acceptable.
Before approving a batch, tell STOOANCE the color range and overall appearance you want, and identify any areas where adjacent pieces need close visual coordination. STOOANCE can support remote slab selection with photos or video. Final appearance should be agreed against the actual selected slabs or an approved sample before production.
Request a Quote
Kayrus Granite Slab and Finish Options
Kayrus Granite is listed in rough slab format. No fixed slab length or width is specified, so buyers should confirm actual dimensions before planning yield or placing an order.
Source-listed slab specifications. Specification: Slab size; Options: Rough slab size; To confirm: Actual length, width and usable area. Specification: Thickness; Options: 18 mm, 20 mm, 30 mm; other customized thicknesses; To confirm: Availability and feasibility for the selected material. Specification: Finish; Options: Brushed, bush hammered, flamed, honed/matte, polished, sandblasted; To confirm: Suitability for the selected slabs and required appearance.
For a quotation, provide the required thickness, finish and target slab dimensions. STOOANCE can check the available material and confirm a workable combination before production. If a particular surface texture matters, request a finish sample for approval.
Request a Quote
Choosing Kayrus Granite for Indoor Spaces
Kayrus Granite is listed for indoor floors, kitchens, and bathrooms. For a kitchen worktop or bathroom vanity, compare polished and honed samples under the lighting where the stone will be used. Consider how each finish looks alongside cabinetry and fixtures, and discuss the cleaning routine with the project team before approving it.
For flooring, choose the finish with the room’s use in mind. A smooth surface may suit a dry interior area, while bathrooms and other areas exposed to water call for a closer review of traction, maintenance, and local requirements. Brushed, bush-hammered, flamed, and sandblasted options can be considered where more texture is wanted, subject to confirmation that the selected Kayrus material can receive the finish.
Before specifying any finish, approve a representative sample and confirm its suitability for the intended application. If the project requires a slip-resistance rating or another performance criterion, ask STOOANCE to confirm what product-specific documentation or testing is available for the selected finish.
Request a Quote
Drawing-Based Kayrus Granite Fabrication
STOOANCE can fabricate Kayrus Granite from slabs into cut-to-size pieces, countertops, vanity tops, stairs, and other drawing-based components. The cutting method and edge work depend on the approved design, selected material, and dimensions. For multi-piece orders, a clear piece schedule helps keep fabrication aligned with the intended layout.
For a fabrication review, provide:
- Dimensioned drawings with units, piece quantities, and a unique identifier for each component.
- Cutout and hole locations, including appliance, sink, faucet, or fixture specifications where relevant.
- Edge profiles, exposed faces, joint locations, and any required corner details.
- Installation drawings or a piece layout showing how adjoining components should meet.
STOOANCE reviews these details before confirming the fabrication route. Bridge cutting, waterjet cutting, CNC shaping, and edge profiling are available where suitable. Confirm achievable dimensions, tolerances, and any site measurements against the actual slabs and approved shop drawings before production.
Request a Quote
Batch Approval and Quality Records
Approve the actual Kayrus Granite batch or a representative sample before production. A product image cannot establish the full colour range of natural stone. STOOANCE can support remote video selection and batch reservation once current availability is checked. Record the accepted colour range and any areas to exclude in the order.
- Material review: check colour variation, natural fissures, and any resin treatment against the approved reference.
- Dimensional review: check thickness, cut dimensions, and flatness against the agreed drawings and tolerances.
- Finish review: inspect surface consistency and edge quality against the approved specification.
- Order traceability: check piece numbers, quantities, and labels against the production documents.
The inspection plan should reflect the selected batch, application, and fabrication requirements. Ask which photos or videos will be supplied for approval and final inspection, including any dry-lay record needed for adjoining pieces. Confirm the records required for your order before production begins.
Request a Quote
Packing and Delivery Planning for Kayrus Granite
Packing is planned around the approved Kayrus Granite order. Slabs may require timber bundles or slab racks, while cut pieces may use fumigated wooden crates or plywood cases. Waterproof protection, foam, corner protection, and steel or A-frame supports can be specified where appropriate. The packing method should be confirmed against piece sizes, quantities, handling needs, and the shipping route.
For cut-to-size orders, STOOANCE can label and group pieces by room, elevation, drawing, or installation sequence so the receiving team can check and distribute them on site. Packing and label records can be included in the order documentation. Overseas installation is normally carried out by qualified local contractors.
To plan a shipment, provide the destination, required delivery basis, site access or unloading constraints, and any packing instructions with your order details. STOOANCE can review EXW, FOB, CIF, or DDP terms where applicable. Most exports move through Xiamen Port, though another Chinese port may suit the material origin and logistics. Confirm the final route, freight terms, schedule, and current material availability before placing the order.
Request a QuoteTechnical Specifications
Product Information
- Product
- Kayrus Granite
- Material / Category
- Granite
- Material
- Granite
- Color
- Brown, Grey
- Size
- Rough Slab Size
- Thickness
- 18mm, 20mm, 30mm, Other Customized Thickness
- Finish
- Brushed, Bush Hammered, Flamed, Honed / Matte, Polished, Sandblasted
- Location
- Bathroom, Floor, Indoor, Kitchen
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
Kayrus Granite FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteWill the brown and grey color of Kayrus Granite vary between slabs?
Yes. Kayrus Granite’s brown and grey tones can vary between slabs because it is natural stone. Pattern and natural fissures may vary too. STOOANCE supports remote video slab selection and checks the color range against the approved material during quality control. The degree of variation cannot be determined from the product listing alone. Review the actual available slabs, then confirm the batch, finish, and acceptable color range before production.
What slab dimensions are available for the current Kayrus Granite batch?
The dimensions of the current Kayrus Granite slab batch have not been provided. The product information lists only “rough slab size,” with no length or width measurements. STOOANCE can check current slab availability and support remote video selection, but the actual batch and its usable dimensions need confirmation before you plan cuts. Send your required finished-piece sizes, thickness, quantity, and drawings so STOOANCE can identify suitable slabs and confirm the cutting plan.
Can I order Kayrus Granite in a thickness other than 18, 20 or 30 mm?
Yes. Kayrus Granite is listed with customized thickness options beyond 18, 20, and 30 mm. A specific thickness still needs confirmation against the selected material, dimensions, finish, application, and production requirements; the listing does not mean every thickness is available. Send STOOANCE your target thickness, required sizes, quantity, finish, and any fabrication drawings. STOOANCE can then check availability and confirm whether the requested specification can be produced before quoting.
Which Kayrus Granite finishes are available for my selected slabs?
Kayrus Granite is listed with brushed, bush hammered, flamed, honed/matte, polished, and sandblasted finishes. That list does not confirm that every finish is suitable or currently available for your selected slabs. STOOANCE needs to check the actual batch, thickness, and intended application before confirming a finish for production. Send your slab selection and preferred finish, along with the thickness and application, so STOOANCE can confirm the workable options and agree on the finish before fabrication.
What should I confirm before choosing Kayrus Granite for indoor flooring?
Before choosing Kayrus Granite for indoor flooring, confirm the actual slab or approved sample, brown and grey color range, batch consistency, thickness, and finish. The product listing includes indoor floors, 18 mm, 20 mm, and 30 mm thicknesses, and polished, honed, brushed, flamed, bush-hammered, and sandblasted finishes. These listings do not establish slip resistance or suitability for your specific floor. Ask your designer or local contractor to set the performance and installation requirements, then send STOOANCE the area, drawings, quantity, and preferred finish for material and batch review.
Can STOOANCE arrange remote material selection for Kayrus Granite?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
Kayrus Granite Buyer’s Guide: From Slab Selection to Delivery
Use this guide to assess Kayrus Granite for your application, approve the right slabs and finish, and compare supplier documentation, fabrication controls, and shipping terms. It also flags purchasing mistakes that can cause mismatched material or costly rework.
What Is Kayrus Granite?
Kayrus Granite is a commercial stone name for a product listed as granite in brown and grey. The listing identifies rough slabs; cut-to-size pieces may be a purchasing route once the selected material, dimensions, and fabrication requirements are confirmed.
The name alone does not establish the stone’s geological classification, quarry origin, exact appearance, or current stock. Brown and grey tones can vary across slabs and batches, so product photographs and small samples should be treated as references rather than a guarantee of the delivered appearance.
STOOANCE can arrange a current-stock check and remote slab review. Approve images or video of the actual selected batch before committing to production.
Where Does Kayrus Granite Fit?
Kayrus Granite is listed for bathrooms, floors, indoor spaces, and kitchens. Those labels indicate possible applications; they do not establish suitability for every exposure, finish, or installation.
| Listed use | Project check |
|---|---|
| Bathroom | Moisture management; wet slip resistance |
| Floor | Traffic; substrate; movement joints |
| Kitchen and indoor | Cleaning; support; fixing |
Bathrooms and Moisture
Bathroom specifications need a moisture and cleaning plan. Confirm sealing and drainage details; obtain wet slip test results before approving shower floors.
Floors and Traffic
Flooring needs a sound substrate, appropriate movement joints, and an installation method suited to the site. Check slip and wear evidence against expected traffic.
Kitchens and Other Interiors
Kitchen designs should account for spills, cleaners, cutouts, and supported spans. Confirm substrate capacity and fixing details with the installer.
Kayrus Granite Slabs, Thicknesses, and Cut Pieces
Kayrus Granite is listed in rough slab form, with 18 mm, 20 mm, 30 mm, and customized thickness options subject to confirmation. Select the supply form after defining the finished application.
Rough Slabs
Rough slabs give fabricators control over cutting and layout.
Available slab dimensions and usable areas must be checked before planning large pieces.
Tiles
Tiles suit repeated floor or wall layouts.
Tile dimensions should be coordinated with the installation grid, joint pattern, and cutting allowance.
Drawing-Based Cut Pieces
Cut-to-size pieces follow approved drawings for countertops, stairs, or panels.
Intended use, unsupported span, edge detail, and handling method determine the thickness and piece size to request.
How to Select a Kayrus Granite Finish
Kayrus Granite is listed in six finishes. Choose by appearance, cleaning demands, and floor safety requirements before approving fabrication.
| Finish | Appearance and Feel | Cleaning Implication |
|---|---|---|
| Polished | Reflective, smooth | Smears show readily |
| Honed or matte | Low glare, smooth | Wipes down readily |
| Brushed | Soft sheen, lightly textured | Relief holds soil |
| Bush-hammered | Coarse, pitted | Recesses retain debris |
| Flamed | Rugged, granular | Texture needs scrubbing |
| Sandblasted | Even, fine texture | Fine texture retains soil |
Smooth Finishes
Polishing heightens brown and gray contrast.
Honing gives a quieter matte appearance; both smooth surfaces wipe down readily.
Textured Finishes
Brushing adds subtle relief; bush-hammering, flaming, and sandblasting create more pronounced texture.
Recesses need more cleaning. For floors, assess slip suitability for the specific installation; finish names establish no rating.
Approve the Actual Finish
Request a finish sample from the chosen Kayrus Granite material.
Confirm that the process suits the selected batch, thickness, and application before production.
Samples, Slab Selection, and Batch Approval
Kayrus Granite is listed in brown and grey, but a small sample cannot represent an entire slab. Approve the actual material before fabrication.
Request a Sample
STOOANCE provides samples; buyers pay courier charges in advance.
A sample helps establish a finish reference. Full-slab color movement and natural fissures require separate review.
Inspect Current Slabs
Current slabs can be reviewed through photographs or remote video. Compare the full surface, color range, fissures, and any resin-treated areas.
Reserve the selected batch when available.
Record Written Approval
Written approval should identify the slabs or batch, selected finish, and acceptable appearance range.
STOOANCE can use that record for production checks. Any later material substitution should receive renewed approval.
Drawings and Fabrication Details to Confirm
Kayrus Granite fabrication starts with an approved piece schedule and marked drawings. Confirm the selected batch against the intended layout before releasing material for cutting.
Piece Schedule And Details
Each piece needs finished dimensions, thickness, quantity, finish, edge profile, and a unique label.
Drawings should locate cutouts, joints, and orientation; specify agreed tolerances for dimensions and visible edges.
Revision And Cutting Approval
Revised drawings must carry a revision number and date so superseded details cannot reach production.
Approve the final drawings, piece schedule, and selected material before cutting begins.
Coordinated Layouts
Continuous floors, walls, and countertops benefit from a dry lay that shows color transitions and joint alignment.
Piece numbering tied to room or elevation drawings helps local installers place delivered pieces in sequence.
Quality Checks Before Kayrus Granite Ships
Kayrus Granite inspection should follow the approved batch and shop drawings from cutting through packing. Agree on inspection points and photo or video records before production begins.
Before Production
The approved slabs or sample set the color range and visible fissure reference. Record any resin treatment and flag unapproved batch substitutions before cutting.
During Fabrication
Shop drawings govern checks of dimensions, thickness, flatness, and edge details. Compare finish consistency across adjoining pieces and document discrepancies while correction remains practical.
Before Shipment
Piece counts, labels, and packing should match the approved schedule. Request agreed photos or video of finished faces, measurements, numbering, and crates; resolve discrepancies through documented rework, replacement, or written acceptance before shipment.
How to Evaluate a Stone Supplier
Compare Kayrus Granite suppliers against the actual slabs and the approved project specification. Request evidence of batch access, fabrication capability, inspection, packing, documentation, and timely answers before committing.
Batch Access and Fabrication
STOOANCE supports stock checks, remote video slab selection, and batch reservation. Its stone fabrication and countertop factories can produce drawing-based components; confirm current batch availability and production capacity for this order.
Approvals and Inspection Evidence
Approved samples, selected slabs, and shop drawings should define the material, finish, dimensions, edges, and cutouts before production.
STOOANCE can provide inspection photos or video, piece numbering, and packing records matched to the order.
Packing, Documents, and Communication
Ask each supplier for a packing plan and the documents required at your destination. Confirm any certificate holder, scope, and validity, plus the delivery schedule and response process for changes.
Common Kayrus Granite Buying Mistakes
Kayrus Granite can vary across slabs and batches. Buying mistakes often become costly once pieces are cut or delivered.
Ordering From a Small Sample
A small sample cannot show full-slab color and pattern.
Approve photos or video of the selected slabs before ordering.
Mixing Unapproved Batches
Adjacent pieces from different batches may show visible shade shifts.
Reserve and approve an identified batch for each continuous area.
Choosing a Finish by Name
Finish names alone cannot show actual texture or reflectance.
Review a physical finish sample under the project’s lighting.
Leaving Drawings Incomplete
Missing cutouts or edge profiles can make fabricated pieces unusable.
Approve shop drawings that locate openings and specify edge details.
Overlooking Inspection and Packing
Unchecked pieces may arrive with missed flaws or transit damage.
Specify inspection records and piece-level packing requirements in the purchase order.
Ordering, Packing, and Delivery Planning
Kayrus Granite orders begin with an inquiry stating the application, quantities, destination, and required form. STOOANCE reviews the specifications before confirming the selected batch, fabrication details, and delivery plan.
Approve Material and Fabrication
Approve the actual batch or slabs before production. Confirm drawings, thickness, finish, edges, cutouts, and piece numbering before fabrication; review inspection photos or video before packing.
Match Packing to the Order
Rough slabs need suitable racks or supports; cut pieces may need crates or cases with waterproof and corner protection. Specify labels by room, elevation, or installation sequence.
Confirm the Delivery Plan
Before dispatch, confirm the destination, Incoterm, required shipping documents, and unloading equipment. Agree which tasks belong to the local installer before accepting the delivery plan.
Kayrus Granite Pricing and Quote Comparison
Kayrus Granite quotations are comparable only when they use the same approved specification and delivery basis. Ask each supplier to identify exclusions and the changes that would trigger a revised quote.
| Cost item | Quote input | Supplier must confirm |
|---|---|---|
| Material and batch | Approved slab or sample | Batch availability; variation allowance |
| Thickness | 18, 20, 30 mm or custom | Finished thickness and measurement basis |
| Finish | Specified surface and edge | Finish suitability; included processing |
| Fabrication | Drawings, cutouts, quantities | Scope, waste allowance, drawing revisions |
| Packing and freight | Packing method, destination, Incoterm | Crating, loading, freight and insurance inclusions |
| Commercial terms | Currency and payment basis | Quote validity, taxes, duties, exclusions |