Honed Jura Grey Limestone Slabs
Honed Jura Grey Limestone Slabs offer a grey, matte surface for projects seeking a natural stone finish. The product listing identifies rough slabs at 18 mm thickness and also lists a polished finish. Review the actual slabs or an approved sample before production, as natural colour, veining, pores and fissures can vary by batch.
STOOANCE supplies slabs and can fabricate drawing-based pieces for walls, floors and other applications. Share your dimensions, finish and intended use so the team can confirm the selected batch and suitable fabrication details.
- Grey natural stone with a honed, matte finish
- 18 mm thickness listed; confirm current batch availability
- Remote slab selection and batch review supported
- Cut-to-size fabrication available from approved drawings
The Character of Jura Grey Limestone
Honed Jura Grey Limestone Slabs offer a grey natural stone appearance with a matte surface. For projects where several slabs will be seen together, the overall impression depends on the selected batch and how individual pieces are arranged.
Natural stone can vary in grey tone, veining, pores, and fissures from slab to slab, and even across a single slab. A small sample can help establish the intended look, but it cannot represent every piece in an order. Review images or video of the actual slabs when the project calls for a closely coordinated appearance.
For adjoining surfaces or a large continuous layout, agree on an acceptable color range before production. Identify any areas where vein direction or visual continuity matters, then review the proposed slab selection and layout against those requirements. This gives fabricators and project teams a clear basis for placing pieces while preserving the natural variation that makes each slab distinct.
Request a Quote
Rough Slab Format and Finish Options
STOOANCE lists Honed Jura Grey Limestone Slabs in rough slab format at 18 mm thickness. Honed or matte is the named finish, and polished is also source-listed. “Rough slab size” does not establish a fixed length or width; the dimensions of the selected slabs need confirmation before layout or cutting plans are finalized.
- Ask for measured slab lengths and widths, plus the quantity available in the batch under consideration.
- Confirm whether 18 mm refers to the supplied slab or the required finished thickness, and agree on any project-specific thickness tolerance.
- Approve the intended finish against a representative sample, and confirm that the selected batch can be supplied or processed in that finish.
For a quotation, specify the required slab count or area, thickness, finish, and any minimum usable dimensions. STOOANCE can then check the current material and batch against those requirements. Natural differences between slabs should be reviewed during selection.
Request a Quote
Indoor and Outdoor Application Review
Honed Jura Grey Limestone Slabs are listed for indoor and outdoor locations. For interior floors and walls, review the actual slab batch alongside the lighting, traffic level and cleaning routine. In bathrooms, entrances and other areas that may become wet, confirm the required slip resistance for the specified finish before approval.
Outdoor use needs a separate review of the installation location and exposure. Climate, freeze–thaw conditions, moisture, drainage, loading and the fixing system can affect whether the selected stone is appropriate. A general indoor/outdoor listing does not establish suitability for a particular façade, terrace or paving detail. Request project-specific test data and confirm the applicable local requirements with the designer and installer.
Share the intended application, site conditions and performance criteria with STOOANCE when requesting a quotation. The team can review the selected material and proposed finish against the project brief; installation details should be agreed with the qualified local contractor.
Request a Quote
Cut-to-Size Fabrication from Approved Drawings
STOOANCE can cut Honed Jura Grey Limestone Slabs into drawing-based components for a project. Fabrication begins after the piece schedule and shop drawings are approved. Actual slab dimensions and the selected batch determine how pieces can be laid out, so the cutting plan should be checked against the material before production.
- Provide dimensioned drawings with a clear identifier and quantity for each piece.
- Mark openings, cutouts, and any joints that must align across adjoining pieces.
- Specify visible edges, edge profiles, and which faces require the honed finish.
- Indicate vein direction or layout relationships where visual continuity matters.
- Agree on project-specific dimensional tolerances and any details that need a first-piece check.
STOOANCE’s fabrication resources include bridge cutting, waterjet cutting, CNC shaping, and edge profiling. The suitable process depends on the approved design and the stone selected. Send drawings and application details with your inquiry so the team can review feasibility, material use, and the fabrication route before quoting.
Request a Quote
Batch Approval, Inspection and Piece Numbering
For Honed Jura Grey Limestone Slabs, approval should be based on the actual selected batch or sample before production. Natural differences in colour, veining, pores and fissures can affect how adjoining pieces read together, so the buyer and STOOANCE should agree on the acceptable range for the intended layout.
STOOANCE matches its inspection plan to the order and application. The review can cover:
- The approved sample or batch against the selected slabs and agreed colour range.
- Natural fissures and any resin treatment, with areas requiring review recorded before release.
- Thickness, dimensions, flatness, honed finish consistency and edge quality against approved order requirements.
- Piece numbers and labels checked against the layout or drawings, so fabricators and local installers can identify each piece.
Where included in the order, inspection photos or video and numbering records give the buyer a basis to review the finished pieces before shipment. Confirm the required views, acceptance criteria and documentation when placing the order.
Request a Quote
Packing and Delivery for Jura Grey Slabs
For Honed Jura Grey Limestone Slabs, STOOANCE plans packing around the approved slab dimensions, quantity, finish, destination and shipping method. Depending on the order, protection may include timber bundles or slab racks, waterproof covering, foam and corner protection. The packing method should be confirmed before production so the slabs can be handled and unloaded with suitable equipment at the receiving site.
For cut-to-size orders, pieces can be packed by room, elevation or installation sequence to help the receiving team identify them. Confirm any crate size, weight or unloading restrictions at the destination when requesting a quotation. STOOANCE can coordinate export delivery; most exports ship through Xiamen Port, while the departure port and available shipping terms depend on the material origin, destination and order.
Send the delivery address or port, required arrival window, site access details and packing requirements with the order inquiry. STOOANCE can then confirm the packing plan, shipping route, commercial terms and achievable schedule for the selected batch. Overseas installation is normally handled by qualified local contractors.
Request a QuoteTechnical Specifications
Product Information
- Product
- Honed Jura Grey Limestone Slabs
- Material / Category
- Limestone
- Material
- Limestone, Marble
- Color
- Grey
- Size
- Rough Slab Size
- Thickness
- 18mm
- Finish
- Honed / Matte, Polished
- Location
- Indoor, Outdoor
Order Confirmation
- Selected Material
- Approve the actual material, batch or sample before production
- Custom Fabrication
- Dimensions, thickness, finish, edges and cutouts are confirmed from drawings
- Quality Records
- Inspection photos or video, labels, numbering and packing records are available according to the order
Honed Jura Grey Limestone Slabs FAQ
Review these common sourcing questions, then send your project requirements for a product-specific quotation.
Request a QuoteIs this Jura Grey product classified as limestone or marble?
This Jura Grey product is listed in the limestone category, but its material field says “Limestone, Marble.” That listing does not establish a definitive geological classification. For a specification that requires one, ask STOOANCE to confirm the classification for the selected batch and provide supporting documentation before approval. STOOANCE can arrange remote slab selection and review the approved material or batch before production.
What are the dimensions of the currently available rough slabs?
The dimensions of the currently available rough slabs are not specified. The product information lists “rough slab size” and an 18 mm thickness, but gives no length or width and does not confirm current stock. STOOANCE can check available slabs and share measurements and video for remote selection. Before ordering, confirm the actual batch, each slab’s usable dimensions, thickness, and whether the slabs will accommodate your cutting plan.
Can this material be supplied in a thickness other than 18 mm?
Potentially, yes. The product information lists 18 mm, but STOOANCE can review a request for another thickness through its slab sourcing and custom fabrication services. Availability and feasibility depend on the selected batch, required dimensions, finish, application, and production schedule; no alternative thickness is confirmed for this material yet. Send your target thickness, slab or cut-to-size dimensions, quantity, intended use, and drawings so STOOANCE can check the material and confirm what it can supply.
How do the honed and polished finish options differ in appearance and suitability?
Honed Jura Grey Limestone has a matte, low-reflection appearance; polished slabs have a glossier surface that makes the grey color and natural markings appear more pronounced. Both finishes are listed for this product, but the right choice depends on the application. For floors, wet areas, or outdoor use, confirm the selected finish against project requirements, including slip resistance and exposure conditions. STOOANCE can provide samples and help review the actual batch before the finish is approved.
What needs to be checked before specifying these slabs for an outdoor application?
Before specifying Honed Jura Grey Limestone Slabs outdoors, confirm that the selected batch and 18 mm thickness suit the site’s climate, exposure, traffic, and installation method. The product listing includes outdoor use, but it provides no performance test results. Request project-relevant evidence for water absorption, freeze–thaw resistance where applicable, and slip resistance when wet. Review the actual slabs for color range, pores, fissures, and repairs. STOOANCE can arrange sample or batch approval and inspection records; the next decision is whether the verified material meets the project’s requirements.
Can STOOANCE arrange remote material selection for Honed Jura Grey Limestone Slabs?
Yes. STOOANCE supports current-stock checks, remote video selection, batch reservation, and photo or video records. Current availability and the final approved batch must be confirmed before production.
How does STOOANCE control quality before shipment?
STOOANCE checks the approved sample or batch, drawings, dimensions, thickness, finish, edges, colour range, natural fissures, resin treatment, flatness, quantities, numbering, labels, and packing. The inspection plan is matched to the order and application.
Are stone samples free?
Samples are free. The buyer pays the courier charge in advance, and that courier cost can be credited after a formal order is placed.
What information is needed for a quotation?
Send the material or reference image, dimensions, thickness, finish, quantity, edge details, drawings, packing requirements, destination, and schedule. STOOANCE then confirms the suitable supply and fabrication route.
Stone Options for Your Project
A coordinated stone project brings material selection, cutting details and finished components together. The reference examples show slab layouts, cut-to-size pieces, countertops and decorative stonework. Use them to explain the shapes, edge profiles and visual direction you would like to explore. Each requested item needs its own review of material suitability, dimensions, finish and installation requirements; a photograph alone does not confirm that every option is available for your selected stone.
Share a room schedule or drawing set with the areas, quantities and details you need. Then confirm the scope for samples, vein direction, cutting, inspection and packing before placing an order. Keep approved material references and drawings with the quotation so the finished pieces can be checked against the same requirements. Product-specific availability, technical evidence, commercial terms and delivery arrangements are confirmed separately for each enquiry.
Get Samples & Quotation
HOW WE WORK
A Clear Path from Enquiry to Delivery
From your first enquiry to arrival checks, use these ten stages to agree the details of a stone order. Images below are workflow illustrations, not factory photographs.
- 01
Share Your Brief
Identify the product, application, quantity and destination.
- 02
Review Material Options
Compare representative images and the available finish choices.
- 03
Request a Quotation
Confirm the included scope and any exclusions in writing.
- 04
Approve Samples
Review the color range, surface and visible variation.
- 05
Check Drawings
Confirm dimensions, seams, edge profiles and piece marks.
- 06
Confirm the Order
Agree specifications, responsibilities and commercial terms.
- 07
Review Fabrication
Use the approved drawings and recorded material selection.
- 08
Arrange Inspection
Check dimensions, visible finish and agreed acceptance points.
- 09
Confirm Packing
Match protected pieces and crate labels to the packing list.
- 10
Coordinate Delivery
Confirm shipping documents, unloading and arrival checks.
Get Samples & Quotation
Send your material reference, drawings, dimensions, finish, quantity and destination. These details help define the sample and quotation request.
STOOANCE product enquiries
Project details and material references are welcome.
Honed Jura Grey Limestone Slabs: A Buyer’s Guide
Use this guide to decide where the stone fits, approve the right finish and batch, compare supplier controls, and avoid costly mistakes in specifications, inspection, packing, and international purchasing.
What Are Honed Jura Grey Limestone Slabs?
Honed Jura Grey Limestone Slabs are grey natural stone slabs with a honed, matte surface. Honing produces a subdued look, but the approved slab or sample should set the visual reference for an order.
STOOANCE’s product listing places the slabs in the limestone category while also labeling the material ‘Limestone, Marble.’ Buyers should confirm the classification for their specific order rather than rely on the commercial name alone. Natural differences in grey tone, veining, pores, and fissures can appear within and between slabs; the acceptable range should be agreed against the selected batch.
Appearance and Batch Variation
Honed Jura Grey Limestone Slabs can show shifts in grey tone, veining, pores, and natural fissures across a batch. Fossil-like markings may appear in some slabs, and a small sample may miss the strongest or quietest areas of a full slab. A honed surface can make these differences visible across broad, evenly lit installations.
STOOANCE can provide photographs or video of the current batch for review. Ask to see multiple full slabs under lighting relevant to the project, including close views of any fissures or treated areas. Agree on the acceptable color and marking range before reserving slabs or approving cuts.
Where Honed Jura Grey Limestone Slabs Work Best
Honed Jura Grey Limestone Slabs offer a matte appearance across several settings. Decorative appeal alone cannot establish suitability; assess the approved batch against exposure, maintenance needs, project-specific testing, detailing, and local codes.
| Application | Primary exposure | Decision check |
|---|---|---|
| Indoor floor | Traffic or water | Slip requirements |
| Wall | Visual variation | Batch layout |
| Vanity | Stains and acids | Care plan |
| Outdoor | Weather and freezing | Testing and drainage |
Indoor Floors
Foot traffic and wet areas require a slip assessment under applicable local rules.
Confirm cleaning expectations and the approved batch before specifying floor panels.
Walls and Vanity Areas
Interior walls generally face less abrasion than floors, making appearance the main selection concern.
Vanity areas face cosmetics, staining, and acidic cleaners; agree on protection and maintenance.
Selected Outdoor Uses
Outdoor exposure adds moisture, drainage, and possible freeze-thaw cycling.
Require relevant test results and project-specific detailing before approving exterior use.
Honed Jura Grey Limestone Slabs Versus Other Finishes
STOOANCE lists honed and polished finishes for Honed Jura Grey Limestone Slabs. Choose between them using the approved batch and the surface conditions of the intended application.
Honed Finish
Honed limestone diffuses light and generally makes fine scratches less conspicuous. Its matte surface may show oil marks, so confirm the cleaning method for the intended space.
Polished Finish
Polished limestone reflects more light and makes surface scratches and acid etching easier to see. Avoid acidic cleaners, and consider expected wear before specifying it for a busy area.
Finish Approval
Brushed or leathered finishes require confirmation on the selected material. Approve a physical finish sample and specify whether sealing or another surface treatment is required; assess floor suitability against project requirements.
Slab Dimensions and Fabrication Choices
Honed Jura Grey Limestone Slabs are listed at 18 mm thickness and rough slab size, with no fixed length or width. Plan cuts against measurements from the selected batch.
Confirm Usable Slab Dimensions
Selected slabs should be measured after allowing for edge trimming and visible defects.
Actual thickness and usable length and width should be confirmed before approving a cutting plan.
Choose Rough or Cut-to-Size
Rough slabs give local fabricators flexibility to nest pieces and manage layout yield.
Cut-to-size orders require approved piece dimensions, quantities, and vein-direction marks.
Define Fabrication Details
Edge profiles and cutouts need dimensioned drawings, including opening positions and corner details.
Drawing-based tolerances for cuts, thickness, edges, and fit should be agreed before fabrication.
How to Approve Samples, Slabs, and Drawings
Approve Honed Jura Grey Limestone Slabs in stages: sample, current batch, visual range, drawings, then a first piece where applicable. Record each decision against the order.
Approve the Sample and Batch
A physical sample establishes the target grey tone and honed finish. Record acceptable veining, pores, fissures, and resin treatment.
Current-batch slab photos or video show variation beyond the sample. Approve identified slabs or a documented visual range.
Sign Off Fabrication Details
Shop drawings should specify finished dimensions, thickness, edges, cutouts, orientation, and quantities. Confirm revisions before cutting.
A dry-lay plan, when needed, should show adjoining pieces, vein direction, and labels by room or elevation.
Check the First Piece
A first fabricated piece, where applicable, confirms finish and edge details against the approved drawing. Record approval before repeating the cut.
Sample approval alone does not approve every slab; verify the selected batch before production.
Quality Checks Before Shipment
STOOANCE checks Honed Jura Grey Limestone Slabs against the approved sample, selected batch, and shop drawings before shipment. Agree acceptance limits for the specific order before production.
Surface and Finish
The approved sample sets the expected color range and honed appearance. Inspect natural fissures, any resin treatment, and finish consistency across the selected slabs.
Batch variation is natural; record which visible differences are acceptable for the intended layout.
Fabricated Piece Checks
Shop drawings govern dimensions, thickness, edge details, and piece quantities. Check flatness and edges against the order’s agreed tolerances.
Piece numbers should match the drawings or installation sequence before packing.
Inspection Records
Labeled photographs and video should show slab faces, details, piece numbers, and packing. Dry-lay records help verify adjoining pieces where layout matters.
STOOANCE can provide these records according to the order’s inspection plan.
How to Evaluate a Stone Supplier
Honed Jura Grey Limestone Slabs should be evaluated against the actual batch and the project’s drawings. Ask suppliers to show what they can source, fabricate, document, and deliver.
Verify Batch And Variation
Current slab availability needs a fresh stock check; a catalog image cannot establish the available color range. STOOANCE supports remote video selection and batch reservation, subject to confirmation.
Check Fabrication And Approvals
Approved samples, selected slabs, and shop drawings should be linked to dimensions, thickness, finish, and edge details. Confirm the supplier can fabricate the required pieces and retain inspection photos, numbering, and packing records.
Confirm Schedule And Packing
A production schedule should follow review of the batch, drawings, finish, and order quantity. Request a packing plan suited to the slab or cut-piece format, with labels that match the approved documents.
Common Buying Mistakes to Avoid
Honed Jura Grey Limestone Slabs should be approved against the actual batch and intended use. An attractive sample cannot settle layout, fabrication, or acceptance decisions.
Sample And Batch Assumptions
A small sample hides variation across full slabs; approve current batch photographs or a remote video inspection before ordering.
Grey slabs can differ in tone, veining, pores, and fissures. Agree on an acceptable color range and reserve the approved batch.
Outdoor Finish And Slab Size
A honed finish listed for outdoor use does not establish suitability for every site. Confirm the finish and application with the project specifier before approval.
Rough slab size is not usable cutting area. Request measured slab dimensions and a cutting layout before setting quantities.
Fabrication Details And Inspection
Unresolved edges and cutouts can force rework. Approve drawings showing profiles, openings, dimensions, and tolerances before fabrication.
Vague inspection terms invite disputes. Define checks for thickness, flatness, finish, fissures, repairs, piece numbering, and packing; request records against those criteria.
Packing, Shipping, and Order Handover
Honed Jura Grey Limestone Slabs need packing matched to their dimensions and the shipment route. Agree on supports, protection, and handover records before loading.
Choose Shipment Supports
Slabs may travel in timber bundles, slab racks, or A-frames, depending on size and loading method. Cut-to-size pieces may need crates or plywood cases with foam, corner, and moisture protection.
Match Labels to Drawings
Piece numbers should match approved drawings, room or elevation references, and installation sequence. Labels on each piece and package help the receiving team check quantities and sort material.
Confirm the Handover
The purchase order should state the destination, agreed Incoterm, loading method, and who arranges local unloading. Request inspection photos or video, a packing list, and numbering records before dispatch.
Pricing Honed Jura Grey Limestone Slabs
Honed Jura Grey Limestone Slabs are listed at 18 mm, but a quote depends on current availability, usable yield, thickness, and finish. Price requests should identify the required quantity and approved material.
STOOANCE can quote stock slabs, batch-selected slabs, or drawing-based pieces. Fabrication, packing, freight, destination, and the agreed Incoterm also affect the final amount; compare offers only after these are specified.
| Supply form | Cost drivers | Quote inputs | Confirm before ordering |
|---|---|---|---|
| Stock slabs | Availability, thickness, finish | Quantity, destination | Current stock, freight terms |
| Batch-selected slabs | Selection, yield, reservation | Approved batch, quantity | Available matching slabs |
| Cut-to-size project pieces | Yield, fabrication, packing | Drawings, edges, piece schedule | Final dimensions, packing, Incoterm |